There is an option in the recording screen to start recording as soon as a key
is pressed.
I can't remember where it is on the moXF, since the layouts are a bit
different, check the manual to see though. But motif has had this for as long
as I can remember. It's what you'll use when recording the ap. But you need to
do some setting up in the mix mode first, and then use the arp record screen I
believe.
It's been a while since I did it, but I've done it before, so I know it can be
done.
HTH, DJX
-----Original Message-----
From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Seth Lowman
Sent: Wednesday, June 07, 2017 12:27 AM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] Using audio loops in pattern mode
How could you do that, when there is no Synchro start function? Your timing
will get off fairly quickly without that. You don't start right on the beat
and your whole pattern thing is thrown off. Therefore, I have decided to go
the audio loops route. That is, to insert audio loops into my pattern sections.
I was wondering how to do that?
God bless!
Seth
On Jun 6, 2017, at 8:39 PM, DJX <megamansuperior@xxxxxxxxxxx> wrote:--
Th
