[mmr] Re: ABS Replacement Options

  • From: John Welch <jwelch@xxxxxxxxxx>
  • To: "mmr@xxxxxxxxxxxxx" <mmr@xxxxxxxxxxxxx>
  • Date: Tue, 19 May 2020 20:37:50 +0000

Ubiguti is good. I’m rather fond of Netgear’s Orbi line. Easy to use, easy to 
set up, requires very little dicking about once it’s running. Very nice mesh 
setup.

From: <mmr-bounce@xxxxxxxxxxxxx> on behalf of Kevin White 
<dmarc-noreply@xxxxxxxxxxxxx>
Reply-To: "mmr@xxxxxxxxxxxxx" <mmr@xxxxxxxxxxxxx>
Date: Tuesday, May 19, 2020 at 4:34 PM
To: "mmr@xxxxxxxxxxxxx" <mmr@xxxxxxxxxxxxx>
Subject: [mmr] Re: ABS Replacement Options

I've recently become a fan of UniFi/Ubiquity. It's enterprise gear so you have 
real management tools, fancy networking and security features, and significant 
expandability. However, their stuff almost as inexpensive as cosumer-grade 
gear. Further, the initial setup for their newer UniFi gear is just as easy as 
consumer stuff with a fancy iOS App (or website if you prefer).

UniFi's founder even has roots working on Apple's AirPort Team: 
https://en.wikipedia.org/wiki/Robert_Pera. He wanted to make better AirPorts ;
and Apple said, "Pass," so he left to start Ubiquity.

You can start with their new Dream Machine (which clearly takes inspiration 
from AirPort Extreme) and then grow from there. 
https://store.ui.com/products/unifi-dream-machine

If you have Ethernet runs you can make an enterprise-grade home network with 
additional access points. They have a few neat options to choose from...
Flying saucer wall/ceiling mount: 
https://store.ui.com/collections/unifi-network-access-points/products/unifi-nanohd-us
Tabletop cylinder thingy: 
https://store.ui.com/collections/unifi-network-access-points/products/unifi-flexhd
Outlet mount with built-in Ethernet switch (this one needs an additional PoE 
injector, but they sell them for under $10: 
https://store.ui.com/collections/unifi-network-access-points/products/unifi-in-wall-hd

I recently replaced my home router with a Dream Machine Pro, but for now I've 
kept my existing pair of final-gen AirPort Extremes as access points. They are 
actually really strong access points, they just aren't very good routers by 
modern standards. I chose the "Pro" over the standard Dream Machine because I'm 
lucky enough to have a full gigabit fiber connection at home and I wanted to 
enable all the security features which requires a beefier CPU at those speeds. 
If I was still on a "slower" cable modem I would have gone for the normal Dream 
Machine as it has enough CPU to handle speeds below ~750 MB/s.

Kevin

--------------------------------
Kevin M. White
kevinmwhite@xxxxxx<mailto:kevinmwhite@xxxxxx>
502-552-6325

Other related posts: