Farhan,
My vote is for a separate HF1 group. It would greatly simplify things.
Simple is better.
Rod KM6SN
On 01/31/2016 10:15 AM, Ashhar Farhan wrote:
arv,
i am keeping those options open for the Si5351 advocates. one could even use the third output for the bfo. for me, i will stick to the Si570. not only can i solder Si570 easily, i am also so used to the low phase noise of Si570 now, that i can't possibly go back to anything noiser.
i am not sure if we can manage another group. but if the HF1 is close to the bitx design, can we look at discussing this the bitx group itself? what's are your thoughts?
- f
On Sun, Jan 31, 2016 at 11:37 PM, Arv Evans <arvid.evans@xxxxxxxxx <mailto:arvid.evans@xxxxxxxxx>> wrote:
Farhan
From a first glance at the schematic it seems that you have addressed
spurious emission problems that plagued the Minima layout. The new
mixers are quite interesting as well.
Are there any plans to replace the Si370 and 3X-18MHz oscillator with
a single Si5351A synthesizer? It might even be possible to use
the 3rd
output from an Si5351a for sidetone and tune-up signal generation?
http://www.qrp-labs.com/synth.html
http://www.qrp-labs.com/images/synth/synth_assembly.pdf
http://goo.gl/9mKi36
http://goo.gl/uPyA00
Will you be starting a new discussion group specifically for the HF-1?
I will be watching for the project documentation on your web site.
Thanks,
Arv K7HKL
_._
On Sun, Jan 31, 2016 at 9:34 AM, Ashhar Farhan
<farhanbox@xxxxxxxxx <mailto:farhanbox@xxxxxxxxx>> wrote:
ok, here is what you all can do.
go ahead and make whatever you can out of the body of work of
minima with the following caveat:
1. to keep minima distinct, i wouldn't like these boards or
version to be callled the Minima or Minima version x, y z.
Choose a different name.
2. if you design is substantially derived from Minima, then it
should be available without any restrictive copyright.
3. the software is under GPL, thus any derived version must be
available under the GPL too.
on the other hand, i have completed a much easier to build
(though slightly more part count than the BITX) all band
transceiver called the HF1. It uses diode mixers and the same
audio back-end as the Minima. The HF1 is a double conversion
transceiver with the first IF of 45 MHz and the second IF of
10 MHz. The first oscillator is the Si570 and the second
oscillator is 18.432 MHz crystal in third overtone. I have
been operating it extensively for the last few months. It is a
fantastic performer which is very easy to setup and build. I
am enclosing a circuit of it here for you guys to go through.
I will complete the write-up and post it soon on my website.
this grew out of my frustration with the Minima's KISS mixer's
oscillator leakage.
- f
- f
On Sun, Jan 31, 2016 at 9:34 PM, Juan Carlos Berberena Glez
<jcberberena@xxxxxxxxx <mailto:jcberberena@xxxxxxxxx>> wrote:
I am interesting in getting more than one set to send to
Cuba.
I am in U.S. now.
If someone can send me the GERBER I can do manufacture in
China and in the same way and help others.
Please feel free to contact me anytime.
WJ6C / Jc
2016-01-31 10:56 GMT-05:00 Vape Sailor
<pedrocalixto80@xxxxxxxxx <mailto:pedrocalixto80@xxxxxxxxx>>:
Count me in if the cost to azores portugal is not to
mutch.
Pedro Almeida
CT5JZX
NRA: PN063
http://ct5jzx.nra.pt/
http://www.qrz.com/db/CT5JZX
Em 31/01/2016 15:51, "Ray" <crf2@xxxxxxxxxxxxxx
<mailto:crf2@xxxxxxxxxxxxxx>> escreveu:
Count me in for 1 set .
Ray kc4dym
Sent from my ASUS Pad
Baruch Zilbershatz <4z4rb11@xxxxxxxxx
<mailto:4z4rb11@xxxxxxxxx>> wrote:
count me in too for 1 set
thanks
baruch 4z4rb
On Sun, Jan 31, 2016 at 4:33 PM, Riccardo
Montaguti <ricky451@xxxxxxxxxx
<mailto:ricky451@xxxxxxxxxx>> wrote:
Good morning,
I could be interested too!
How much would it cost to ship to Italy?
On which version of the minima is based the PCB?
73 Riccardo
Inviato da iPhone
> Il giorno 31/gen/2016, alle ore 12:52, Ruud
<pe1hlv@xxxxxxxxx <mailto:pe1hlv@xxxxxxxxx>>
ha scritto:
>
> I am interested in one of your boards. I
live in the Netherlands. How much are the
total costs for the board and post ???
>
> Kind regards
> Ruud
> pe1hlv
>
>> Op 31 jan. 2016 om 00:55 heeft Andrew
Ricketts <andrewr@xxxxxxxx
<mailto:andrewr@xxxxxxxx>> het volgende
geschreven:
>>
>> Hi Ashhar et al.
>>
>> I had 10 PCB's made see
http://www.magma.ca/~andrewr/
<http://www.magma.ca/%7Eandrewr/>
>>
>> I made these for my own use. Two other
friends I gave boards and are building.
>> I have my receiver working in RX. Thank you
for a great design.
>> I have 5 blank boards left. I would like to
send you and anyone else that wants one for
the cost of postage.
>> The boards are not perfect there are a few
cuts and jumpers required. (see construction
doc a work in progress). If we have more
builders can get
>> any remaining issues fixed. My BOM uses
Digikey part numbers but can get manfacturers
numbuers from that.
>> Is Surface mount but can be easily hand
assembled.
>> There is a construction manual on my web
site that can be downloaded.
>> I also have a board designed for digital
card I also have 5 of these left.
>>
>> If the design is viable I can clean up the
minor errors and have another batch of boards
made available at cost.
>> I had the boards made in China at
reasonable cost.
>>
>> Let me know what you think.
>>
>> Andrew.
>>
>>
>>
>> --
>> This message is virus free, protected by
Primus - Canada's
>> largest alternative telecommunications
provider.
>>
>> http://www.primus.ca
>>
>> On Sat 30/01/16 1:11 PM , Ashhar Farhan
farhanbox@xxxxxxxxx
<mailto:farhanbox@xxxxxxxxx> sent:
>>> guys, here is the pinch, the mixer leakage
is too much to meet the
>>> spectral requirements of FCC. if we can
get the local oscillator down
>>> to -50dbc then we have a game. - f
>>> On Sat, Jan 30, 2016 at 11:17 PM, Vape
Sailor wrote:
>>> Still whaiting too.
>>> Whe could make a group buy for boards (if
avaiable) and parts like a
>>> kit.
>>>
>>> Pedro Almeida
>>> CT5JZX
>>>
>>> NRA: PN063
>>> http://ct5jzx.nra.pt/ [2]
>>> http://www.qrz.com/db/CT5JZX [3] Em
30/01/2016 17:34, "Baruch
>>> Zilbershatz" escreveu:
>>> i am waiting toolike to play....
>>> On Sat, Jan 30, 2016 at 6:19 PM, takis
perreas [5]> wrote:
>>> Hi ganque!Same here like Paul. I am
waiting for a PCB to surface.I
>>> had even sent Sandeep a contribution to
purchase a batch of 3 by 3
>>> PCBoards of the earlier version but never
received the Main Board. I
>>> can homebrew Minima, Manhattan style, but
I do like the neatness of
>>> a PCB.Well, any news?!Takissv3auw/m0lpt
>>> -------------------------
>>> Date: Sat, 30 Jan 2016 08:42:16 -0500
>>> Subject: [minima] Re: Minima PCB
>>> From: paul.chebi@xxxxxxx
<mailto:paul.chebi@xxxxxxx> [6]
>>> To: minima@xxxxxxxxxxxxx
<mailto:minima@xxxxxxxxxxxxx> [7]
>>> Andrew: what's the latest on the Minima's
PCB board. How Can
>>> I get one along with BOM of parts ?
>>> Thanks
>>>
>>> Paul kk4ptv On Jul 15, 2015 9:27 AM,
andrew wrote:
>>> This is a new pcb that has just been
created by VE3ZMH so a couple
>>> of guys here in Canada who are interested
in the minima can try it
>>> out. Is surface mount.
>>> Andrew
>>> On 15-07-15 02:57 AM, gurudatta panda wrote:
>>> Hi All,
>>> I was away for a while and unaware about
the latest development.
>>> Can somebody put some light on which
design the PCB is being talked
>>> about? Is the design and testing is
completed for minima now?
>>> VU3GDP
>>> On Mon, Jul 13, 2015 at 11:29 PM, andrew wrote:
>>> A couple of the local Hams got together
here and decided to have a
>>> go at this radio. So we are sharing the
costs and the experience. Got
>>> to check out the board to make sure I have
not made any big mistakes.
>>> I am also working on the digital board to
go with this. I am also
>>> writing a construction manual and it has
the parts list as all
>>> Digikey parts. Is a mix of surface mount
and through hole but the
>>> surface mount are all larger parts so can
be hand assembled.
>>> Surface mount parts very inexpensive.
>>> (1206 size typ) Going to be posting
progress on the web page,
>>> suggest you wait till we fire up the first
boards and get the bugs
>>> out.
>>> If it all works and there is interest will
likely make boards
>>> available at nominal cost to other Hams.
>>> Keep checking the web page.
>>> Andrew
>>> On 15-07-13 12:57 PM, Paul Chebi wrote:
>>> I would be interested in buying one of
these boards if when
>>> available as well as receiving any
progress reports on the building
>>> of the Minima. BOM, etc.
>>> Thanks for sharing
>>> Paul Chebi
>>> Sent from my iPhone
>>> On Jul 13, 2015, at 11:57 AM, andrew wrote:
>>> This is my first post. I have created my
own PCB for the minima. It
>>> mostly uses surface mount. Going to start
assembling it this week.
>>> Will document progress on web page
magma.ca/~andrewr <http://magma.ca/%7Eandrewr>
[11].
>>> VE3ZMH
>>> --
>>> THANKS & REGARDS
>>> GURUDATTA PANDA JR. SITE ENGINEER R.V.N.L.
/ KDJR
>>> MOB : +91 9777447844 [12] (WORK) +91
9778238593 [13]
>>> (HOME)
>>> --
>>> 4Z4 RB
>>> Baruch Zilbershatz
>>> Ha-Shibolim 18
>>> Nitzanay-Oz 42836
>>> Israel
>>>
>>>
>>> Links:
>>> ------
>>> [1]
>>>
http://webmail.primus.ca/javascript:top.opencompose(\'pedrocalixto80@gmail
<http://webmail.primus.ca/javascript:top.opencompose%28%5C%27pedrocalixto80@gmail>.
>>> com\',\'\',\'\',\'\')[2] http://ct5jzx.nra.pt/
>>> [3] http://www.qrz.com/db/CT5JZX
>>> [4]
>>>
http://webmail.primus.ca/javascript:top.opencompose(\'4z4rb11@xxxxxxxxx\
<http://webmail.primus.ca/javascript:top.opencompose%28%5C%274z4rb11@xxxxxxxxx%5C>',\
>>> '\',\'\',\'\')[5]
>>>
http://webmail.primus.ca/javascript:top.opencompose(\'sv3auw@xxxxxxxxxxxxx\
<http://webmail.primus.ca/javascript:top.opencompose%28%5C%27sv3auw@xxxxxxxxxxxxx%5C>
>>> ',\'\',\'\',\'\')[6]
>>>
http://webmail.primus.ca/javascript:top.opencompose(\'paul.chebi@xxxxxxx\
<http://webmail.primus.ca/javascript:top.opencompose%28%5C%27paul.chebi@xxxxxxx%5C>',
>>> \'\',\'\',\'\')[7]
>>>
http://webmail.primus.ca/javascript:top.opencompose(\'minima@xxxxxxxxxxxxx\
<http://webmail.primus.ca/javascript:top.opencompose%28%5C%27minima@xxxxxxxxxxxxx%5C>
>>> ',\'\',\'\',\'\')[8]
>>>
http://webmail.primus.ca/javascript:top.opencompose(\'andrewr@xxxxxxxx\
<http://webmail.primus.ca/javascript:top.opencompose%28%5C%27andrewr@xxxxxxxx%5C>',\'
>>> \',\'\',\'\')[9]
>>>
http://webmail.primus.ca/javascript:top.opencompose(\'andrewr@xxxxxxxx\
<http://webmail.primus.ca/javascript:top.opencompose%28%5C%27andrewr@xxxxxxxx%5C>',\'
>>> \',\'\',\'\')[10]
>>>
http://webmail.primus.ca/javascript:top.opencompose(\'andrewr@xxxxxxxx\
<http://webmail.primus.ca/javascript:top.opencompose%28%5C%27andrewr@xxxxxxxx%5C>',\'
>>> \',\'\',\'\')[11] http://magma.ca/~andrewr
<http://magma.ca/%7Eandrewr>
>>> [12]
http://webmail.primus.ca/TEL:%2B91%209777447844
>>> [13]
http://webmail.primus.ca/TEL:%2B91%209778238593
>
-- 4Z4 RB
Baruch Zilbershatz
Ha-Shibolim 18
Nitzanay-Oz 42836
Israel
-- /“If you have a penny and I have a penny and we exchange
pennies, you still have one cent and I still have one
cent. But if you have an idea and I have an idea and we
exchange ideas, you now have two ideas and I now have two
ideas.”/
Lic.Juan Carlos Berberena Gonzalez
WJ6C exCO6BG
www.frcuba.com <http://www.frcuba.com>
www.berberena.com <http://www.berberena.com>
http://espanol.groups.yahoo.com/group/cacharreando/
https://www.youtube.com/user/juancarlosberberena