Kevin,
Do you have the one called, passive big knob?
I have one of them.
If so. I think it is.
Sitting at the unit as if you are using it.
On the back panel. 2 pairs of jack sockets. These are inputs 1 and 2.
To the right of them is a stereo mini plug which overrides one pair of the
jack sockets, when you insert in to the mini plug.
To the right on the back are 2 pairs of outputs feeding to your speakers 1 and
speakers 2.
These connect to the back of your speaker boxes assuming your speakers are
powered and have an in built power amp.
On the top panel left side. A button allows you to listen to input pair 1 or
pair 2.
On the top panel far right edge is a speaker switch alloing you to feed to
spkeakers 1 pair or speakers 2 pair.
In the middle of the top are 3 buttons. I guessing are mute. Mono, or dim.
Behind those three is the big knob, volume control.
Once you connect it up you will soon verify each control's functions.
If yours is a different unit, these instructions may not work out.
Best with it.
Ross.
-----Original Message-----
From: midimag-bounce@xxxxxxxxxxxxx <midimag-bounce@xxxxxxxxxxxxx> On Behalf Of
Kevin Doucet
Sent: Tuesday, 21 March 2023 11:32 AM
To: midimag@xxxxxxxxxxxxx
Subject: [freelists-midimag] layout for the Mackie Big Knob Studio
Hi all,
If anyone can help with this I would appreciate it!
Kevin
