[Linuxtrent] Re: kppp
- From: Marco Rauzi <kubuntuster@xxxxxxxxx>
- To: linuxtrent@xxxxxxxxxxxxx
- Date: Tue, 30 Aug 2005 10:00:33 +0200
il mio file di log invece:
Aug 30 09:58:09 localhost pppd[5519]: pppd 2.4.3 started by murcok, uid 1000
Aug 30 09:58:09 localhost pppd[5519]: Using interface ppp0
Aug 30 09:58:09 localhost pppd[5519]: Connect: ppp0 <--> /dev/ttyS0
Aug 30 09:58:13 localhost pppd[5519]: PAP authentication succeeded
Aug 30 09:58:14 localhost pppd[5519]: not replacing default route to
eth0 [192.168.0.1]
Aug 30 09:58:14 localhost pppd[5519]: Cannot determine ethernet
address for proxy ARP
Aug 30 09:58:14 localhost pppd[5519]: local IP address 151.25.24.148
Aug 30 09:58:14 localhost pppd[5519]: remote IP address 151.6.140.58
Aug 30 09:58:14 localhost pppd[5519]: primary DNS address 193.70.192.25
Aug 30 09:58:14 localhost pppd[5519]: secondary DNS address 193.70.152.25
Aug 30 09:59:24 localhost pppd[5519]: Hangup (SIGHUP)
Aug 30 09:59:24 localhost pppd[5519]: Modem hangup
Aug 30 09:59:24 localhost pppd[5519]: Connect time 1.2 minutes.
Aug 30 09:59:24 localhost pppd[5519]: Sent 0 bytes, received 260 bytes.
2005/8/30, Marco Rauzi <kubuntuster@xxxxxxxxx>:
> il file options che ho modificato mettendo un noauth al posto di auth è
> questo:
> # /etc/ppp/options
> #
> # Originally created by Jim Knoble <jmknoble@xxxxxxxxxxxxxxxxxxxxx>
> # Modified for Debian by alvar Bray <alvar@xxxxxxxxxxx>
> # Modified for PPP Server setup by Christoph Lameter <clameter@xxxxxxxxxx>
> #
> # To quickly see what options are active in this file, use this command:
> # egrep -v '#|^ *$' /etc/ppp/options
>
> # Specify which DNS Servers the incoming Win95 or WinNT Connection should use
> # Two Servers can be remotely configured
> # ms-dns 192.168.1.1
> # ms-dns 192.168.1.2
>
> # Specify which WINS Servers the incoming connection Win95 or WinNT should use
> # ms-wins 192.168.1.50
> # ms-wins 192.168.1.51
>
> # Run the executable or shell command specified after pppd has
> # terminated the link. This script could, for example, issue commands
> # to the modem to cause it to hang up if hardware modem control signals
> # were not available.
> #disconnect "chat -- \d+++\d\c OK ath0 OK"
>
> # async character map -- 32-bit hex; each bit is a character
> # that needs to be escaped for pppd to receive it. 0x00000001
> # represents '\x01', and 0x80000000 represents '\x1f'.
> asyncmap 0
>
> # Require the peer to authenticate itself before allowing network
> # packets to be sent or received.
> # Please do not disable this setting. It is expected to be standard in
> # future releases of pppd. Use the call option (see manpage) to disable
> # authentication for specific peers.
> noauth
>
> # Use hardware flow control (i.e. RTS/CTS) to control the flow of data
> # on the serial port.
> crtscts
>
> # Use software flow control (i.e. XON/XOFF) to control the flow of data
> # on the serial port.
> #xonxoff
>
> # Specifies that certain characters should be escaped on transmission
> # (regardless of whether the peer requests them to be escaped with its
> # async control character map). The characters to be escaped are
> # specified as a list of hex numbers separated by commas. Note that
> # almost any character can be specified for the escape option, unlike
> # the asyncmap option which only allows control characters to be
> # specified. The characters which may not be escaped are those with hex
> # values 0x20 - 0x3f or 0x5e.
> #escape 11,13,ff
>
> # Don't use the modem control lines.
> #local
>
> # Specifies that pppd should use a UUCP-style lock on the serial device
> # to ensure exclusive access to the device.
> lock
>
> # Don't show the passwords when logging the contents of PAP packets.
> # This is the default.
> hide-password
>
> # When logging the contents of PAP packets, this option causes pppd to
> # show the password string in the log message.
> #show-password
>
> # Use the modem control lines. On Ultrix, this option implies hardware
> # flow control, as for the crtscts option. (This option is not fully
> # implemented.)
> modem
>
> # Set the MRU [Maximum Receive Unit] value to <n> for negotiation. pppd
> # will ask the peer to send packets of no more than <n> bytes. The
> # minimum MRU value is 128. The default MRU value is 1500. A value of
> # 296 is recommended for slow links (40 bytes for TCP/IP header + 256
> # bytes of data).
> #mru 542
>
> # Set the interface netmask to <n>, a 32 bit netmask in "decimal dot"
> # notation (e.g. 255.255.255.0).
> #netmask 255.255.255.0
>
> # Disables the default behaviour when no local IP address is specified,
> # which is to determine (if possible) the local IP address from the
> # hostname. With this option, the peer will have to supply the local IP
> # address during IPCP negotiation (unless it specified explicitly on the
> # command line or in an options file).
> #noipdefault
>
> # Enables the "passive" option in the LCP. With this option, pppd will
> # attempt to initiate a connection; if no reply is received from the
> # peer, pppd will then just wait passively for a valid LCP packet from
> # the peer (instead of exiting, as it does without this option).
> #passive
>
> # With this option, pppd will not transmit LCP packets to initiate a
> # connection until a valid LCP packet is received from the peer (as for
> # the "passive" option with old versions of pppd).
> #silent
>
> # Don't request or allow negotiation of any options for LCP and IPCP
> # (use default values).
> #-all
>
> # Disable Address/Control compression negotiation (use default, i.e.
> # address/control field disabled).
> #-ac
>
> # Disable asyncmap negotiation (use the default asyncmap, i.e. escape
> # all control characters).
> #-am
>
> # Don't fork to become a background process (otherwise pppd will do so
> # if a serial device is specified).
> #-detach
>
> # Disable IP address negotiation (with this option, the remote IP
> # address must be specified with an option on the command line or in
> # an options file).
> #-ip
>
> # Disable IPCP negotiation and IP communication. This option should
> # only be required if the peer is buggy and gets confused by requests
> # from pppd for IPCP negotiation.
> #noip
>
> # Disable magic number negotiation. With this option, pppd cannot
> # detect a looped-back line.
> #-mn
>
> # Disable MRU [Maximum Receive Unit] negotiation (use default, i.e.
> # 1500).
> #-mru
>
> # Disable protocol field compression negotiation (use default, i.e.
> # protocol field compression disabled).
> #-pc
>
> # Require the peer to authenticate itself using PAP.
> #+pap
>
> # Don't agree to authenticate using PAP.
> #-pap
>
> # Require the peer to authenticate itself using CHAP [Cryptographic
> # Handshake Authentication Protocol] authentication.
> #+chap
>
> # Don't agree to authenticate using CHAP.
> #-chap
>
> # Disable negotiation of Van Jacobson style IP header compression (use
> # default, i.e. no compression).
> #-vj
>
> # Increase debugging level (same as -d). If this option is given, pppd
> # will log the contents of all control packets sent or received in a
> # readable form. The packets are logged through syslog with facility
> # daemon and level debug. This information can be directed to a file by
> # setting up /etc/syslog.conf appropriately (see syslog.conf(5)). (If
> # pppd is compiled with extra debugging enabled, it will log messages
> # using facility local2 instead of daemon).
> #debug
>
> # Append the domain name <d> to the local host name for authentication
> # purposes. For example, if gethostname() returns the name porsche,
> # but the fully qualified domain name is porsche.Quotron.COM, you would
> # use the domain option to set the domain name to Quotron.COM.
> #domain <d>
>
> # Enable debugging code in the kernel-level PPP driver. The argument n
> # is a number which is the sum of the following values: 1 to enable
> # general debug messages, 2 to request that the contents of received
> # packets be printed, and 4 to request that the contents of transmitted
> # packets be printed.
> #kdebug n
>
> # Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer
> # requests a smaller value via MRU negotiation, pppd will request that
> # the kernel networking code send data packets of no more than n bytes
> # through the PPP network interface.
> #mtu <n>
>
> # Set the name of the local system for authentication purposes to <n>.
> # This is a privileged option. With this option, pppd will use lines in the
> # secrets files which have <n> as the second field when looking for a
> # secret to use in authenticating the peer. In addition, unless overridden
> # with the user option, <n> will be used as the name to send to the peer
> # when authenticating the local system to the peer. (Note that pppd does
> # not append the domain name to <n>.)
> #name <n>
>
> # Enforce the use of the hostname as the name of the local system for
> # authentication purposes (overrides the name option).
> #usehostname
>
> # Set the assumed name of the remote system for authentication purposes
> # to <n>.
> #remotename <n>
>
> # Add an entry to this system's ARP [Address Resolution Protocol]
> # table with the IP address of the peer and the Ethernet address of this
> # system.
> proxyarp
>
> # Use the system password database for authenticating the peer using
> # PAP. Note: mgetty already provides this option. If this is specified
> # then dialin from users using a script under Linux to fire up ppp wont work.
> # login
>
> # If this option is given, pppd will send an LCP echo-request frame to the
> # peer every n seconds. Normally the peer should respond to the echo-request
> # by sending an echo-reply. This option can be used with the
> # lcp-echo-failure option to detect that the peer is no longer connected.
> lcp-echo-interval 30
>
> # If this option is given, pppd will presume the peer to be dead if n
> # LCP echo-requests are sent without receiving a valid LCP echo-reply.
> # If this happens, pppd will terminate the connection. Use of this
> # option requires a non-zero value for the lcp-echo-interval parameter.
> # This option can be used to enable pppd to terminate after the physical
> # connection has been broken (e.g., the modem has hung up) in
> # situations where no hardware modem control lines are available.
> lcp-echo-failure 4
>
> # Set the LCP restart interval (retransmission timeout) to <n> seconds
> # (default 3).
> #lcp-restart <n>
>
> # Set the maximum number of LCP terminate-request transmissions to <n>
> # (default 3).
> #lcp-max-terminate <n>
>
> # Set the maximum number of LCP configure-request transmissions to <n>
> # (default 10).
> #lcp-max-configure <n>
>
> # Set the maximum number of LCP configure-NAKs returned before starting
> # to send configure-Rejects instead to <n> (default 10).
> #lcp-max-failure <n>
>
> # Set the IPCP restart interval (retransmission timeout) to <n>
> # seconds (default 3).
> #ipcp-restart <n>
>
> # Set the maximum number of IPCP terminate-request transmissions to <n>
> # (default 3).
> #ipcp-max-terminate <n>
>
> # Set the maximum number of IPCP configure-request transmissions to <n>
> # (default 10).
> #ipcp-max-configure <n>
>
> # Set the maximum number of IPCP configure-NAKs returned before starting
> # to send configure-Rejects instead to <n> (default 10).
> #ipcp-max-failure <n>
>
> # Set the PAP restart interval (retransmission timeout) to <n> seconds
> # (default 3).
> #pap-restart <n>
>
> # Set the maximum number of PAP authenticate-request transmissions to
> # <n> (default 10).
> #pap-max-authreq <n>
>
> # Set the maximum time that pppd will wait for the peer to authenticate
> # itself with PAP to <n> seconds (0 means no limit).
> #pap-timeout <n>
>
> # Set the CHAP restart interval (retransmission timeout for
> # challenges) to <n> seconds (default 3).
> #chap-restart <n>
>
> # Set the maximum number of CHAP challenge transmissions to <n>
> # (default 10).
> #chap-max-challenge
>
> # If this option is given, pppd will rechallenge the peer every <n>
> # seconds.
> #chap-interval <n>
>
> # With this option, pppd will accept the peer's idea of our local IP
> # address, even if the local IP address was specified in an option.
> #ipcp-accept-local
>
> # With this option, pppd will accept the peer's idea of its (remote) IP
> # address, even if the remote IP address was specified in an option.
> #ipcp-accept-remote
>
> # Disable the IPXCP and IPX protocols.
> # To let pppd pass IPX packets comment this out --- you'll probably also
> # want to install ipxripd, and have the Internal IPX Network option enabled
> # in your kernel. /usr/doc/HOWTO/IPX-HOWTO.gz contains more info.
> noipx
>
> # Exit once a connection has been made and terminated. This is the default,
> # unless the `persist' or `demand' option has been specified.
> #nopersist
>
> # Do not exit after a connection is terminated; instead try to reopen
> # the connection.
> #persist
>
> # Terminate after n consecutive failed connection attempts.
> # A value of 0 means no limit. The default value is 10.
> #maxfail <n>
>
> # Initiate the link only on demand, i.e. when data traffic is present.
> # With this option, the remote IP address must be specified by the user on
> # the command line or in an options file. Pppd will initially configure
> # the interface and enable it for IP traffic without connecting to the peer.
> # When traffic is available, pppd will connect to the peer and perform
> # negotiation, authentication, etc. When this is completed, pppd will
> # commence passing data packets (i.e., IP packets) across the link.
> #demand
>
> # Specifies that pppd should disconnect if the link is idle for <n> seconds.
> # The link is idle when no data packets (i.e. IP packets) are being sent or
> # received. Note: it is not advisable to use this option with the persist
> # option without the demand option. If the active-filter option is given,
> # data packets which are rejected by the specified activity filter also
> # count as the link being idle.
> #idle <n>
>
> # Specifies how many seconds to wait before re-initiating the link after
> # it terminates. This option only has any effect if the persist or demand
> # option is used. The holdoff period is not applied if the link was
> # terminated because it was idle.
> #holdoff <n>
>
> # Wait for up n milliseconds after the connect script finishes for a valid
> # PPP packet from the peer. At the end of this time, or when a valid PPP
> # packet is received from the peer, pppd will commence negotiation by
> # sending its first LCP packet. The default value is 1000 (1 second).
> # This wait period only applies if the connect or pty option is used.
> #connect-delay <n>
>
> # Packet filtering: for more information, see pppd(8)
> # Any packets matching the filter expression will be interpreted as link
> # activity, and will cause a "demand" connection to be activated, and reset
> # the idle connection timer. (idle option)
> # The filter expression is akin to that of tcpdump(1)
> #active-filter <filter-expression>
>
> # ---<End of File>---
>
>
> Il 29/08/05, Diaolin (aka Giuliano Natali)<diaolin@xxxxxxxxxxx> ha scritto:
> >
> > Marco Rauzi ha scritto:
> > > ho un ultimo problema di configurazione di Debian... sono riuscito
> > > dopo una attenta lettura di forum ecc a risolvere dei problemi di
> > > autenticazione di kppp (usciva con codice errore 1 )e connettermi ad
> > > internet, ma dopo la connessione internrt non va lostesso, vorrei
> > > sapere se qualcuno sa dirmi il perché...
> > > grazie ancora.
> >
> >
> > Sei un vecchiardo della lista ma le domande sembrano quelle di un neofita
> > :-)
> > Passa un po di log del ppp etc etc etc.
> > Diaolin
> >
> > --
> > L'amore e' quella cosa che quando c'e' non capisci cos'e'
> > ma ti permette di andare avanti.
> > Diaolin
> >
> >
> > --
> > Per iscriversi (o disiscriversi), basta spedire un messaggio con OGGETTO
> > "subscribe" (o "unsubscribe") a mailto:linuxtrent-request@xxxxxxxxxxxxx
> >
> >
> >
>
>
> --
> - Marco -
>
--
- Marco -
--
Per iscriversi (o disiscriversi), basta spedire un messaggio con OGGETTO
"subscribe" (o "unsubscribe") a mailto:linuxtrent-request@xxxxxxxxxxxxx
Other related posts:
