[linux-muc] <kein Betreff>
- From: Joh_Borres@xxxxxx
- To: linux-muc@xxxxxxxxxxxxx
- Date: Sat, 01 Dec 2007 00:54:38 +0100
Liebe Liste,
ich versuche es noch einmal: Ich habe in den Kernel alle mögliche
SCSI-Unterstützung eingebaut.
this is ls -l /proc/bus/usb
dr-xr-xr-x 1 root root 0Dec 1 01:32 001
-r--r--r--r 1 root root 0 Dec 1 01:32 devices
-r--r--r--r 1 root root 0 Dec 1 01:32 drivers
This ist less /etc/mtab
/proc/bus/usb /proc/bus/usb usbdevfs rw 0 0
der dmesg-output macht mich allerdings leider nicht schlauer, wie ich den stick
ansprechen soll, um Daten darauf zu transferieren::
(...)
PCI: PCI BIOS revision 2.10 entry at 0xfda04
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Starting kswapd v 1.5
vga16fb: initialiizing
vga16fb: wapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0:VGA16 VGA frage buffer device
Serial deriver version 4.27 with BUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS02 at 0x03e8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100 % native mode: will probe irqs later
ide0: BM-DMA at 0xfcd0-0xfcd7, BIOS setting: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfcd8-0xfcdf, BIOS setting: hdc:pio, hdd:pio
hda: FUJITSU MHC2040AT, ATA DISK drive
hdc: TOSHIBA CD-ROM XM-1802B, ATAPI CDROM drive
ide2: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: FUJITSU...
hdc: ATAPI...
scsi0: SCSI host adapter emulation for IDE ATAPI devices
scsi: 1 host
scsi: detected total
(...)
Partition check:
hda: hda1 hda2 hda3
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
apm: disabled on user request
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver dabusb
dabusb.c: v1.54: DAB-USB Interface Driver for Linux (c)1999
usb.c: registered new driver dc2xx
usb.c: registered new driver hid
usb.c: registered new driver usblp
usb-uhci.c: $Resivion: 1.237 $ time 01:30:57 Nov 22 2007
usb-uhci.c: High bandwidth mode disabled
PCI: Enabling bus mastering for device 00:3a
usb-uhci.c.: USB UHCI at I/0 0xfce0, IRQ 9
usb-uhci.c.: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
usb.c: kmalloc IF c5feb980, numif 1
usb.c: new device atrings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI Root Hub
SerialNumber: fce0
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standolone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c5feb980
usb.c: call_policy add, num 1 -- no FS yet
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
VFS: Mounted root /ext2 filesystem) readonly
Freeing unused kernel memory: 84k freed
hub.c: port1, portstatus 103, change 0, 12 Mb/s
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB new device connect, assigned device number 2
usb.c: kmalloc IF c5dd12b0, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
usb.c: USB device number 2 default language ID 0x409
Manufacturer: USB_DISK
Product: USB_DISK
SerialNumber: 0ABC
usb.c: unhandled interfaced on device
usb.c:USB device 2 (vend/prod 0x1aa6/0x201) is not claimed by any active driver
.
Length =10
DescriptionType =01
USB version = 2.00
Vendor: Products =1aa6:0201
MaxPacketSize0 =64
NumConfigurations =1
Device version =10.00
Device Class:SubClass:Protocol=00:00:00
Per-interface classes
Configuration:
bLength =9
(...)
usb.c: kusbd: /sbin/hotplug add 2
Adding Swap
...
_____________________________________________________________________
Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
http://smartsurfer.web.de/?mc=100071&distributionid=000000000066
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~ Info (Main-Site): http://www.linux-muc.de/
~~ Un/Subscribe: //www.freelists.org/cgi-bin/list?list_id=linux-muc
~~ Archives //www.freelists.org/archives/linux-muc/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Other related posts:
- » [linux-muc] <kein Betreff>
