[linux-cirrus] Testing 2.6.13 git tree
- From: llandre <r&d2@xxxxxxxxxxxx>
- To: Michael Burian <dynmail1@xxxxxxxxxxxxxxxxx>
- Date: Fri, 30 Sep 2005 13:30:57 +0200
Hi Michael,
today I tried to clone the repository with git 0.9.6 and it failed (it
is strange because 10 days ago I was able to do that with the same
version of git ...). So I switched to latest git version (0.99.7.GIT)
and it worked fine.
Secondly I'm testing this kernel on my board but I can't make the
framebuffer to work :(
I use the same settings that worked fine with 2.6.9-ep93xx-rc2:
/*
240x320 Hitachi
Max pixel clock freq = 1/83ns ~= 12.048 MHz (VDiv = 0x0000c10a)
Typ pixel clock freq = 5.33 MHz (VDiv = 0x0000c125)
*/
TIMING_VALUES("Hitachi TX09D50VM1CCA", CRT_GENERIC,
(fRasterConfigure)NULL,
0, 0x0000c125, 240, 16/*HFP*/, 12/*HBP*/, 5/*HSYNC*/, 320,
3/*VFP*/, 3/*VBP*/, 1/*VSYNC*/),
I think the fb driver changed and so I have to tune these settings
accordingly. Any hints?
--
llandre
DAVE Electronics System House - R&D Department
web: http://www.dave-tech.it
email: r&d2@xxxxxxxxxxxx
Other related posts:
