John, I was told that typing "make check" will run the test harnesses. That is probably what was outputting the errors. Best regards from Ohio, U.S.A., Vic E-mail: vic.beckley3@xxxxxxxxx -----Original Message----- From: liblouis-liblouisxml-bounce@xxxxxxxxxxxxx [mailto:liblouis-liblouisxml-bounce@xxxxxxxxxxxxx] On Behalf Of John J. Boyer Sent: Wednesday, July 04, 2012 12:56 PM To: liblouis-liblouisxml@xxxxxxxxxxxxx Subject: [liblouis-liblouisxml] Re: Testing 32-bit liblouis Make check now works and shows lots of errors in the tables. What do i have to do to run the test harness? John On Wed, Jul 04, 2012 at 11:13:38AM +0200, Christian Egli wrote: > "John J. Boyer" <john.boyer@xxxxxxxxxxxxxxxxx> writes: > > > To be able to track down bugs in 32-bit builds of liblouis, I set up one > > on my home directory. I used --enable-ucs4 in configure. When I run make > > check I get the following error output. > > > ../../tests/squash_space.c:51: error: �for� loop initial declaration used > > outside C99 mode > > Ah it appears that this is only allowed in c99 (which apparently my gcc > is using). What version of gcc are you using? I just commited a fix to > comply with c90. > > Thanks > Christian > > -- > Christian Egli > Swiss Library for the Blind, Visually Impaired and Print Disabled > Grubenstrasse 12, CH-8045 Z�rich, Switzerland > For a description of the software, to download it and links to > project pages go to http://www.abilitiessoft.com -- John J. Boyer, Executive Director GodTouches Digital Ministry, Inc. http://www.godtouches.org Madison, Wisconsin, USA Peace, Love, Service For a description of the software, to download it and links to project pages go to http://www.abilitiessoft.com For a description of the software, to download it and links to project pages go to http://www.abilitiessoft.com