Hi List,
With hungarian language in hungarian braille some situations the three
letter consonants need different way hyphenate.
Few example words:
asszony: hyphenated word is asz-szony
Asszonnyal: hyphenated word is asz-szony-nyal
Meggyes: right hyphenated word is megy-gyes
The hyphen-2.8.8 source package the README.nonstandard document
describing following part the non standard hyphenation rules related:
"Non-standard hyphenation
------------------------
Some languages use non-standard hyphenation; `discretionary'
character changes at hyphenation points. For example,
Catalan: paral·lel -> paral-lel,
Dutch: omaatje -> oma-tje,
German (before the new orthography): Schiffahrt -> Schiff-fahrt,
Hungarian: asszonnyal -> asz-szony-nyal (multiple occurance!)
Swedish: tillata -> till-lata.
Using this extended library, you can define
non-standard hyphenation patterns. For example:"
With asszonnyal word related I tryed following rules in hyph_hu_HU.dic,
without successfully result:
First variation:
".as3szon/sz=,2,1
n1nyal./ny=,1,1"
If I launch lou_checkhyphens utility, in table list type
hu-hu-g1.ctb,hyph_hu_HU.dic, press r letter and type asszonnyal word,
the asszonnyal word not hyphenated.
Liblouis hyphenation feature doesn't support this type rules?
I attaching entire README.nonstandard document.
Unfortunately hungarian language very often need this type way hyphenation.
Future possible extending Liblouis hyphenate function to support this
type nonstandard hyphenation rules too?
Attila
Non-standard hyphenation
------------------------
Some languages use non-standard hyphenation; `discretionary'
character changes at hyphenation points. For example,
Catalan: paral·lel -> paral-lel,
Dutch: omaatje -> oma-tje,
German (before the new orthography): Schiffahrt -> Schiff-fahrt,
Hungarian: asszonnyal -> asz-szony-nyal (multiple occurance!)
Swedish: tillata -> till-lata.
Using this extended library, you can define
non-standard hyphenation patterns. For example:
l·1l/l=l
a1atje./a=t,1,3
.schif1fahrt/ff=f,5,2
.as3szon/sz=sz,2,3
n1nyal./ny=ny,1,3
.til1lata./ll=l,3,2
or with narrow boundaries:
l·1l/l=,1,2
a1atje./a=,1,1
.schif1fahrt/ff=,5,1
.as3szon/sz=,2,1
n1nyal./ny=,1,1
.til1lata./ll=,3,1
Note: Libhnj uses modified patterns by preparing substrings.pl.
Unfortunatelly, now the conversion step can generate bad non-standard
patterns (non-standard -> standard pattern conversion), so using
narrow boundaries may be better for recent Libhnj. For example,
substrings.pl generates a few bad patterns for Hungarian hyphenation
patterns resulting bad non-standard hyphenation in a few cases. Using narrow
boundaries solves this problem. Java HyFo module can check this problem.
Syntax of the non-standard hyphenation patterns
------------------------------------------------
pat1tern/change[,start,cut]
If this pattern matches the word, and this pattern win (see README.hyphen)
in the change region of the pattern, then pattern[start, start + cut - 1]
substring will be replaced with the "change".
For example, a German ff -> ff-f hyphenation:
f1f/ff=f
or with expansion
f1f/ff=f,1,2
will change every "ff" with "ff=f" at hyphenation.
A more real example:
% simple ff -> f-f hyphenation
f1f
% Schiffahrt -> Schiff-fahrt hyphenation
%
schif3fahrt/ff=f,5,2
Specification
- Pattern: matching patterns of the original Liang's algorithm
- patterns must contain only one hyphenation point at change region
signed with an one-digit odd number (1, 3, 5, 7 or 9).
These point may be at subregion boundaries: schif3fahrt/ff=,5,1
- only the greater value guarantees the win (don't mix non-standard and
non-standard patterns with the same value, for example
instead of f3f and schif3fahrt/ff=f,5,2 use f3f and schif5fahrt/ff=f,5,2)
- Change: new characters.
Arbitrary character sequence. Equal sign (=) signs hyphenation points
for OpenOffice.org (like in the example). (In a possible German LaTeX
preprocessor, ff could be replaced with "ff, for a Hungarian one, ssz
with `ssz, according to the German and Hungarian Babel settings.)
- Start: starting position of the change region.
- begins with 1 (not 0): schif3fahrt/ff=f,5,2
- start dot doesn't matter: .schif3fahrt/ff=f,5,2
- numbers don't matter: .s2c2h2i2f3f2ahrt/ff=f,5,2
- In UTF-8 encoding, use Unicode character positions: össze/sz=sz,2,3
("össze" looks "össze" in an ISO 8859-1 8-bit editor).
- Cut: length of the removed character sequence in the original word.
- In UTF-8 encoding, use Unicode character length: paral·1lel/l=l,5,3
("paral·lel" looks "paral·1lel" in an ISO 8859-1 8-bit editor).
Dictionary developing
---------------------
There hasn't been extended PatGen pattern generator for non-standard
hyphenation patterns, yet.
Fortunatelly, non-standard hyphenation points are forbidden in the PatGen
generated hyphenation patterns, so with a little patch can be develop
non-standard hyphenation patterns also in this case.
Warning: If you use UTF-8 Unicode encoding in your patterns, call
substrings.pl with UTF-8 parameter to calculate right
character positions for non-standard hyphenation:
./substrings.pl input output UTF-8
Programming
-----------
Use hyphenate2() or hyphenate3() to handle non-standard hyphenation.
See hyphen.h for the documentation of the hyphenate*() functions.
See example.c for processing the output of the hyphenate*() functions.
Warning: change characters are lower cased in the source, so you may need
case conversion of the change characters based on input word case detection.
For example, see OpenOffice.org source
(lingucomponent/source/hyphenator/altlinuxhyph/hyphen/hyphenimp.cxx).
László Németh
<nemeth (at) openoffice.org>
