Another observation when looking through example.cfg
The diameters of the nozzle and filament is burried in the cfg file and as
I understand those parameters is used in the print process.
When I change the nozzle I then have to log-on the Pi and alter the
printer.cfg with actual parameters.
I would instead like an extra parameter to the FIRMWARE_RESTART command so
the process can be done from the Octoprint terminal.
Example: FIRMWARE_RESTART nozzle03mm.cfg
If FIRMWARE_RESTART is given without parameters the default printer.cfg is
loaded.
An alternative could be a M-code with the parameters.
Have fun
Niels
