[kismac] Re: [binaervarianz] r183 - branches/usb-drivers/Sources/Driver/USBJack
- From: "Rohan Hill" <rohan@xxxxxxxxxxxxx>
- To: <kismac@xxxxxxxxxxxxx>
- Date: Sun, 3 Sep 2006 03:02:31 -0400
Is there a binary build online for r183 (or anything later than r159)?
The latest build at
http://kismac.de/_trac/
is r159
-----Original Message-----
From: kismac-bounce@xxxxxxxxxxxxx [mailto:kismac-bounce@xxxxxxxxxxxxx] On
Behalf Of devnullian@xxxxxxx
Sent: Sunday, September 03, 2006 1:23 AM
To: kismac@xxxxxxxxxxxxx
Subject: [kismac] Re: [binaervarianz] r183 -
branches/usb-drivers/Sources/Driver/USBJack
They started a new section called branches (instead of trunk) for the
new drivers. Point your svnX to: https://svn.binaervarianz.de/kismac/
branches to get it. I would guess everything will get merged when
the drivers are working and stable.
This confused me too, until I browsed the repository via trac...
devnullian
On Sep 2, 2006, at 7:41 PM, John Warren wrote:
> did I miss something. When I try to checkout the latest version, it
> only says that there are 175. Did the address change again?
>
> Using svnX if it makes any difference.
>
> On 9/2/06, svn@xxxxxxxxxxxxxxxx <svn@xxxxxxxxxxxxxxxx> wrote:
>> Author: gkruse
>> Date: 2006-09-02 21:51:13 +0200 (Sat, 02 Sep 2006)
>> New Revision: 183
>>
>> Modified:
>> branches/usb-drivers/Sources/Driver/USBJack/RalinkJack.mm
>> Log:
>> Just moving things around. This is slightly more stable but still
>> has the same parsing problems.
>>
>>
>> Modified: branches/usb-drivers/Sources/Driver/USBJack/RalinkJack.mm
>> ===================================================================
>> --- branches/usb-drivers/Sources/Driver/USBJack/RalinkJack.mm
>> 2006-09-02 17:43:05 UTC (rev 182)
>> +++ branches/usb-drivers/Sources/Driver/USBJack/RalinkJack.mm
>> 2006-09-02 19:51:13 UTC (rev 183)
>> @@ -852,48 +852,43 @@
>> bool RalinkJack::startCapture(UInt16 channel) {
>> setChannel(channel);
>> RTUSBWriteMACRegister(TXRX_CSR2, 0x4e); //enable monitor mode?
>> - IOReturn ref;
>> - ref = (*_interface)->ReadPipeAsync(_interface, kInPipe,
>> &_recieveBuffer, sizeof(_recieveBuffer), (IOAsyncCallback1)
>> _interruptRecieved, this);
>> return true;
>> }
>>
>> bool RalinkJack::_massagePacket(int len){
>> unsigned char* pData;
>> - UInt8 frame[len*2];
>> + UInt8 frame[sizeof(_recieveBuffer)];
>> WLFrame * tempFrame;
>> PRXD_STRUC pRxD;
>> - WLIEEEFrame* testIeee;
>>
>> +if (len >= (sizeof(RXD_STRUC) + 24)) {
>> tempFrame = (WLFrame *)frame;
>>
>> pData = (unsigned char*)&_recieveBuffer;
>>
>> - testIeee = (WLIEEEFrame*)pData;
>> pRxD = (PRXD_STRUC)(pData + len - sizeof(RXD_STRUC));
>> - if (pRxD->Crc || pRxD->CiErr || pRxD->PhyErr) {
>> + if (pRxD->Crc) {
>> + //NSLog(@"Bad CRC");
>> return false; //its a bad packet, signal the interrupt
>> to continue
>> - }
>> -
>> - tempFrame->signal = pRxD->BBR1;
>> -
>> - //this should be a memcpy but I can't make it work!
>> - tempFrame->frameControl = testIeee->frameControl;
>> - tempFrame->duration = testIeee->duration;
>> - tempFrame->idnum = testIeee->idnum;
>> - tempFrame->sequenceControl = testIeee->sequenceControl;
>> - tempFrame->dataLen = pRxD->DataByteCnt;
>> - tempFrame->dataLen = NSSwapHostShortToLittle(tempFrame-
>> >dataLen);
>> -
>> - memcpy(tempFrame->address1, testIeee->address1, 6);
>> - memcpy(tempFrame->address2, testIeee->address2, 6);
>> - memcpy(tempFrame->address3, testIeee->address3, 6);
>> - memcpy(tempFrame->address4, testIeee->address4, 6);
>> - memcpy(frame + sizeof(WLFrame) + sizeof(UInt16), pData+sizeof
>> (WLIEEEFrame), len - sizeof(WLIEEEFrame));
>> -
>> - memcpy(&_recieveBuffer, tempFrame, len + sizeof(WLPrismHeader));
>> -
>> - return true; //override if needed
>> + }
>> + else if(pRxD->CiErr) {
>> + //NSLog(@"CiErr");
>> + return false; //its a bad packet, signal the interrupt
>> to continue
>> + }
>> + else if(pRxD->PhyErr) {
>> + //NSLog(@"PhyErr");
>> + return false; //its a bad packet, signal the interrupt
>> to continue
>> + }
>> + else {
>> + // NSLog(@"Good Frame : %d, %d, %d", pRxD->Crc, pRxD-
>> >CiErr, pRxD->PhyErr);
>> + memcpy(frame + sizeof(WLPrismHeader), pData, sizeof
>> (_recieveBuffer));
>> + tempFrame->signal = pRxD->BBR1;
>> + memcpy(&_recieveBuffer, frame, sizeof(_recieveBuffer));
>> + return true; //override if needed
>> + }
>> }
>> +return false;
>> +}
>>
>> RalinkJack::RalinkJack() {
>> _isEnabled = false;
>>
>>
>>
>
Other related posts:
