[jsonar] Re: Registering JSonar.dll under Windows 10?

  • From: "Yamuna Jivana dasa \(Yogan\)" <ykhandoo@xxxxxxxxx>
  • To: <jsonar@xxxxxxxxxxxxx>
  • Date: Thu, 29 Apr 2021 15:29:35 +0200

Thanks Tim and Cuong. I'll try this. And I've run into an even worse problem under Windows 10: I changed my account type from "Administrator" to "Owner", which Windows says allows system-wide access, but now the User Account Control doesn't even offer the "Yes" option to allow programs, including itself, to make changes. So I can't even use it to disable UAC, nor can I access the Accounts under Settings, because it won't allow the program access to the user. Unless someone has a solution I'll have to reinstall Windows 10 from scratch! Outch! Also, Windows 10 seems to create a login to the computer via a Microsoft Account, not a local login when Windows is being installed. I can't seem to remember if during install there is a way to force it to create a local login. Any ideas? Otherwise, again, after install we have to change that from Windows Settings, Accounts menu, to use a local account after the user account is already set up as a Microsoft account. Windows 10 seems to be real crap! If only we could keep time stand still and remain in my youth under Windows 7! Call me a cave man! I don't care! It's fun all the same!

And since this is the JSonar list, when I was installing Windows 10 I researched as much as I could to make the computer under Windows 10 more accessible, more performance driven, and more friendly for the audio enthusiast user. My notes are attached, but remember I'm so new at all this so much of it is experimental. Use at your own risk, but please correct any bad advice I might be offering. Will be very grateful if you guys could evaluate my notes so we could all benefit better from it. Looking forward to your feedback, and I'll post fixes after everyone has shared corrections and we have discussed those where necessary, and we can all then keep the final notes for our benefit.

Yamuna


-----Original Message----- From: Tim Burgess
Sent: Thursday, April 29, 2021 1:05 PM
To: jsonar@xxxxxxxxxxxxx
Subject: [jsonar] Re: Registering JSonar.dll under Windows 10?

Hi Yamuna,

The only thing that I can think of immediately is that it's a permissions problem, given that the .dll is within the c:\program files (x86) structure.

Try issuing the same command from within a command prompt that's being run with administrator permissions and I think you'll be OK.

Cheers.

Tim

-----Original Message-----
From: jsonar-bounce@xxxxxxxxxxxxx <jsonar-bounce@xxxxxxxxxxxxx> On Behalf Of Yamuna Jivana dasa (Yogan)
Sent: 28 April 2021 18:05
To: jsonar@xxxxxxxxxxxxx; Chris Belle <chrisb1963@xxxxxxxxxxx>
Subject: [jsonar] Registering JSonar.dll under Windows 10?

Hi all,
I'm trying to manually register jsonar_x64.dll under Windows 10 64-bit computer, as it did not work during JSonar install, because when I try to use Control Insert R to run the Jsonar setup wizard, it complains that the file is not registered.

In the Run command, I use this syntax:
regsvr32 "C:\Program Files (x86)\JSonar\jsonar_x64.dll"
And I also tried using the non 64 DLL as well:
regsvr32 "C:\Program Files (x86)\JSonar\jsonar.dll"
I get the error code like this:
RegSvr32
The module "C:\Program Files (x86)\JSonar\jsonar_x64.dll" was graphic 488 loaded but the call to DllRegisterServer failed with error code 0x80070005.
For more information about this problem, search online using the error code as a search term.
OK button.

Any advice will be much appreciated.

Thanks.

Yamuna

-----Original Message-----
From: Chris Belle
Sent: Thursday, April 23, 2020 5:16 PM
To: jsonar@xxxxxxxxxxxxx ; Yamuna Jivana dasa (Yogan)
Subject: Re: [jsonar] Sonar instruments and Effects Plugins HSC new sets Windows 10

Here you go.

https://www.dropbox.com/s/fzvk49ncjfl782l/Windows10_SonarHSC.zip?dl=1

These are offered as they are, I am not responsible for support or errors, etc, I have given these to some of my students and used them slightly and they seem to work better under windows 10.

I can't remember where I grabbed them,

when I went looking a while back they seemed to not be on the hotspotclicker site,

but I had them stashed on a drive here, so hope it helps someone.



On 4/22/2020 3:58 PM, Yamuna Jivana dasa (Yogan) wrote:

Hi everyone,
Some years ago I think I heard that someone built new HSC Sets for the
Sonar suite of instruments and effects plugins for Windows 10, because
for some reasons, all the plugins spots that were asigned to all of
the HSC Sets for them have moved to a different offset position under
Windows 10 systems.
Is this true? Am I remembering correctly? If so where can I get those
new sets from?
I'm thinking about moving my audio machine from Windows 7 to Windows 10.
Not sure if this is a good move for Sonar and all these plugins. Any
advice will be appreciated. I'm thinking of using Jaws 17 for Sonar
and HSC compatibility, but Jaws 2020 which I now have, for everything
else under Windows 10 including that Edge browser they now use.
Or does Jaws 2020 work with Sonar, HSC and the Plugin scripts?

Hope you guys can answer any or some of these questions. Anything will
be appreciated in anticipation of this possible move over to Windows 10.

Thanks good folks.
Kind regards,

Yamuna

-----Original Message----- From: Yamuna Jivana dasa (Yogan)
Sent: Sunday, March 22, 2020 6:16 AM
To: jeremy ; jsonar@xxxxxxxxxxxxx
Subject: Re: [jsonar] Re: Testing - list is gone too quiet since I
changed to new E-mail address

Well, under Windows 7 it will continue to work until our hardware
gives up I guess, and till that time that the new hardware we buy in
the form of computers won't support Windows 7 downgrading any more,
but till that day we can still enjoy Sonar as we've known it all
along. I'll tell you, I still do, and yup, I still make music using
Sonar alone with various midi instruments and audio FX plugins! So no
complaints on this end for sure!
It's just that now that everyone's talking about reaper, it does make
me itch to get my hands wet with that too. Not that I actually need
to, it's just a hobby these days anyway, so let's see when I'm settled
after moving country to India and in my new home and settled peacefully. I just might!
:-)

Yamuna

-----Original Message----- From: jeremy
Sent: Sunday, March 22, 2020 6:09 AM
To: jsonar@xxxxxxxxxxxxx
Cc: Yamuna Jivana dasa (Yogan)
Subject: Re: [jsonar] Re: Testing - list is gone too quiet since I
changed to new E-mail address

I still use sonar all the time, it’s just what I prefer, so I totally
understand the sentiment and I think it should keep being used as
really, the recording program, even with the older version, still does
most of the things that we need to do.

Sent from my iPhone

On Mar 21, 2020, at 11:19 PM, Chris Belle <chrisb1963@xxxxxxxxxxx> wrote:

I see you 'grin'.

Well, sadly, sonar is fading out, just a few of us old timers who
still hanging on by our fingernails, but I am spending 99 percent of
my working time these days with reaper.

I still so much prefer the way sonar deals with midi, but because of
the increasing difficulty

using sonar with windows 10, both NVDA and jaws are leaving access
for sonar behind, the new NVDA doesn't support the app module, so
have to use a portable older ver of NVDA to run sonar, and for newer
jaws you have to install JSonar manually, it's doable but rather a
big pain, will the day come when we can't use it at all any more?

I hope someone picks up the new band labs up to date sonar and makes
it accessible, but I'm not going to hold my breath.

But wow, what a great legacy, a great run, did we not make some fine
music with this great program?

The good thing is that with reaper many of the things we loved in
sonar can still be used, so all is not lost.

And I'll use sonar as long as I can, I'm in till the last gasp 'grin'.


On 3/21/2020 9:23 PM, Yamuna Jivana dasa (Yogan) wrote:
Hi everyone at JSonar,

I'm just checking if mail is working at JSonar list. Since I removed
my subscription from my old E-mail address and re-subscribed using
another E-mail address, I notice no mail has come through since then.
I also posted the below mail to the list but I did not even get it
echoed back to me from the list.
Thanks and please ignore unless you are inclined to send me a
private one jus to say it's coming through. Thanks good people.

Yamuna

-----Original Message----- From: Yamuna Jivana dasa (Yogan)
Sent: Sunday, March 08, 2020 11:23 PM
To: jsonar@xxxxxxxxxxxxx
Subject: Looking for blind musicians and producers in India

Hi everyone,

Please can someone advise me on where I can post the following
request to reach the most amount of blind musicians and producers.

I am moving to India to a city called Mayapur. The closest major
city is called Kolkata. I wish to get in touch with as many blind
musicians in the area as close to Mayapur as possible.

This is very important for me. Please forgive my request to cross
post this to as many blind musician groups you may know of, from the
Logic Audio accessibility group, to the Repers accessibility, all
across the Windows and the Mac Voiceover platforms. I will
appreciate this favour as I am not necessarily subscribed to a group
and then I cannot post to it, so if you are then you can post on my
behalf. I will truly appreciate this little favour.
Kind regards,

Yamuna

--
Evolution violates the second law of thermal dynamics, as well as
ignoring much    of real science.




--
Evolution violates the second law of thermal dynamics, as well as ignoring
much    of real science.


First, let's make sure your Windows Sign-in logs into the local computer
account and not the Microsoft account. This speeds up Windows Start-up
process:
From the Desktop, press Windows-I for Settings menu. Tab to the list and go
down arrow 3 times to Accounts and press Spacebar to activate. In the
resulting menu, tab once to the resulting listbox and you should land on
"Your Info". Press Spacebar on this. Tabbing from here should reveal one of
two possible links: "Sign in with a Microsoft account instead" or "Sign into
a local account instead". If it says "Sign in with a Microsoft account", you
are already signing in locally so problem solved. If it shows "Sign into a
local account instead", press this link with Spacebar or Enter, and follow
the instructions to make this change. You will first validate your existing
Microsoft account credentials to allow you to make the change, then you will
be asked for a Username and Password. Provide this information, confirm
password, hit Next, and Windows will want to restart. Allow this and after
reboot you should be signing in locally, improving the log-in efficiency
into Windows.

Now for improving Windows 10's File Explorer's behaviour, to match Windows
7's better Windows Explorer behaviour:
From File Explorer in Control Panel (Search box, type File explorer and down
to it and press enter), or from the Windows-E File Explorer menu:
How to return File Explorer's tree view:
Open File Explorer > View tab >, Pull down with spacebar the "Navigation
Pane" then Check the "Navigation Pane" item.
Back to View menu with Alt-V, down-arrow to open the view, right-arrow to
Layout Toolbar Change your view, if it does not say "Details", spacebar on
it, arrow to the Details item and enter on it to activate the Details view.

Customize and apply Windows Explorer settings:
In File Explorer, Alt-F for File menu, O for the Folder Options dialog:
Under General tab of Folder Options: "Open File Explorer to" should be set
to "This PC".
Under the Views tab, configure the following:
Display the full path in the title bar - On
Show hidden files, folders and drives - On
Hide empty drives - Off
Hide extensions for known file types - Off
Hide protected operating system files - Off (only if you often perform
technical  work on your computer)
Show pop-up descriptions for folder and desktop items - On
Expand to open folder - On
Show all folders - On
Tab to and press the "Apply to all folders" button to make these settings
standard across folders.

Disable User Account Control to improve efficiency of Apps installations. We
can re-enable it after everything is installed if dealing with multiple
users on the computer.

Change computer name to something more in line with your desire and what
some of your purchased software licences may register with:
Settings / About, tab to "Rename this PC" button.

Add Desktop icons for "This PC", your user account and "Control Panel"
[Optional for conveniences if preferred]:
Press Windows X to right-click Start menu. Go up this list to "Settings" and
press enter. Note: We could just press Windows I to get to settings as well.
Tab to the grid of list items that comes up and right-arrow to
"Personalization" and press Spacebar to activate it.
Tab to the listbox of options and go down to "Themes" and press Spacebar to
activate it's menus. Tab from here, around 7 times, to reach "Desktop Icon
settings" and press Enter to open that dialog.
Up and down arrow through this list of checkboxes and, using the spacebar,
choose the desktop icons you want on your desktop. Hit Ok to confirm.

Turn on Always show notifications in System tray:
Windows I for Settings, Right-arrow to Personalization, Enter to activate,
Tab to list, down to Taskbar and Spacebar to select, Tab around 10 times to
"Notification Area, Select which icons appear on the Taskbar" and press
Enter.  Tab to the "Always show all icons in the notification area" button,
and spacebar to turn it on.

Turn on Windows Startup sound that we have become accustomed to from earlier
versions of Windows (which is off by default in Windows 10 versions at this
time):
Back to Settings / Personalization / Themes menu, , tab around 3 times to
"Sounds", press enter, and from the "Sounds scheme" list item, press Tab 3
times to the Windows startup checkbox. If unchecked, press Spacebar to check
it, then Ok from this dialog.

Add the Volume Mixer to the Desktop:
Hit Windows E for Windows Explorer, down to Local disk C, Windows, System32.
In here find SndVol.exe. Context menu on it with applications key, go to
"Send to", "Desktop".
Now from the Desktop, find this shortcut "SndVol.exe - Shortcut". Hit F2,
and rename it to Volume Mixer. You may also then want to assign a hotkey
such as Control-Alt-V from its properties with Alt-Enter.

Turn off sleep and screen-saver, and in some systems, uncheck the "turn on
Fast Startup" function under Power options

Set "High performance" power preset, and if preferred, choose "Advanced
power options" and make desired changes to all those power settings to
optimize for high performance.

Turn on file deletion confirmation in Recycle Bin Properties (not on by
default in Windows 10, so that when you delete a file in Windows it does not
ask to confirm trashing into recycle bin):
Open Recycle Bin, Press Alt for ribbon menu, right-arrow to "Manage, Recycle
Bin Tools", press Down-arrow to activate, right-arrow to "Recycle Bin
Properties".
(All of the above steps could also be reached by simply pressing Alt-Enter
to reach Properties of the desktop Recycle bin icon. Just demonstrating the
ribbon menu here.)
Tab to "Display Delete Confirmation Dialog", and check it with Spacebar.

Select Best Performance in System - Advanced settings - properties.

Create a shortcut to "Safely Remove Hardware" wizard so we can protect data
integrity more safely:
(if the Safely remove hardware wizard shows up in System Tray, this step
will not work properly on such machines and are also not required).
Right-click on Desktop, and go to New>Shortcut. Enter the following location
of the shortcut:
RunDll32.exe shell32.dll,Control_RunDLL hotplug.dll
Click Next, and rename it to Safely Remove Hardware. Click Finish.
This shortcut will give an error if the Safely Remove Hardware wizard
already exists in system tray.

Change from "Quick removal policy" to "Better performance policy" in Disk
Management, disk Properties, for each removable disk. Also apply Write
Caching to protect data integrity, for each of these disks.

Disable Lock screen at Windows start-up:
Windows 10 Home edition:
Start button, Search. Type regedit and hit Enter.
Expand to the following level:
HKEY_LOCAL_MACHINE.
SOFTWARE
Policies
Microsoft.
Right-click Windows, and click "New".
Click "Key".
Type "Personalization" and hit Enter.
Right-click the Personalization key you just created and click "New".
Click "DWORD (32-bit) Value".
Type "NoLockScreen" and hit Enter.
Double-click the NoLockScreen DWORD you just created.
Type "1" in the Value data field. Click OK.
To re-enable the lock screen, change the DWORD value back to 0.

In Professional and other versions of Windows 10, use the Group Policy
editor to remove the lock screen:
Press Control-Escape to activate the Start button. The Search field becomes
active. Type gpedit and hit Enter.
Expand the "Administrative Templates" tree.
Expand the "Control Panel" tree.
Select Personalization then tab to the list view.
Select with arrow keys, then Press enter on "Do not display the lock
screen".
Tab to the radio buttons, move down to "Enabled". Press Apply and OK.

YJd's personal notes (remove before making public)
Test both audio card drivers
Test Firewire driver
Install Motu 896HD drivers
Install M-Audio MidiSport 4x4 driver
Install HotSpotClicker
Install the new Sonar Plugins HSC sets for Windows 10
Install Sonar 8.5 and run updates until 8.5.3
Install JSonar scripts

Install Sonar and configure for JSonar scripts

Other related posts: