[jsonar] Re: No sound from midi controler?

  • From: Sandra Gayer <sandragayer7@xxxxxxxxx>
  • To: jsonar@xxxxxxxxxxxxx
  • Date: Thu, 6 Apr 2017 14:27:40 +0100

Hello again,
It turns out the no sound from my midi in and out was all my own
fault. I didn't have the cables in the correct order, yay! I was
afraid it was something more serious.

Very best wishes,
Sandra.

On 4/5/17, Sandra Gayer <sandragayer7@xxxxxxxxx> wrote:

Thanks Chris,
I can't get any sound from my midiin and out set up now. Can't get
hold of Focusrite as tech support have been in a meeting for over an
hour so I may have to phone them tomorrow as our phone is being used
at the mo. Oh well, at least I have the 25S working again.

Very best wishes,
Sandra.

On 4/5/17, Chris Ankin <chrisoverlord25@xxxxxxxxxxx> wrote:
Sandra,


Well done, glad you got things sorted


Chris



On 05/04/2017 12:12, Sandra Gayer wrote:
Hello Chris and everyone,
Success! It was a soundcard issue. I had a remote log in session with
a tech support staff member from Focusrite. Now I can get back to
being frustrated with my midi software ineptitude yay!

Very best wishes,
Sandra.

On 4/4/17, Sandra Gayer <sandragayer7@xxxxxxxxx> wrote:
Hello Chris,
I didn't try to load a previous project. Thanks for that. Will try in
the morning and report back. I tried to record and play back which
didn't work.

Very best wishes,
Sandra.

On 4/4/17, Chris Ankin <chrisoverlord25@xxxxxxxxxxx> wrote:
Hi Sandra,


I think with things like this it's a process of elimination, so
firstly
are you able to load and hear any sound from previously saved
projects,
or is it only when you initiate a new soft synth instance?


Have you installed any new software or updates recently that could
have
affected things? for example was it working perfectly yesterday and
not
today?


Best,


Chris



On 04/04/2017 20:43, Sandra Gayer wrote:
Hello Everyone,
I'm writing because I was trying to use my midi controller this
evening and loaded an instrument. What ever I tried to do, no sound
came from the instrument. However, Native Instruments' controller
uses
speech which will go from the keyboard into your soundcard from the
keyboard and I could hear that. Lights were flashing on the keyboard
so I know notes were registering somewhere. I enabled everything I
should have via the soft synth insert and the plugins submenue and
checked the relevant check boxes for midi in and out. Is
thereanything
else I should be doing? I tried switching everything off and then on
again.

Any advice would be greatly appreciated.
Very best wishes,
Sandra.



--
Soprano Singer
www.sandragayer.com

Broadcast Presenter

www.rnibconnectradio.org.uk/music-box.html

Voiceover Artist

www.archangelvoices.co.uk/content/sandra-gayer






--
Soprano Singer
www.sandragayer.com

Broadcast Presenter

www.rnibconnectradio.org.uk/music-box.html

Voiceover Artist

www.archangelvoices.co.uk/content/sandra-gayer



-- 
Soprano Singer
www.sandragayer.com

Broadcast Presenter

www.rnibconnectradio.org.uk/music-box.html

Voiceover Artist

www.archangelvoices.co.uk/content/sandra-gayer

Other related posts: