If use eloquence as I stated before you can assign witch card should be used with the port command. Other wise jfw will get the preferred card or the card it finds first. How ever you can have your jfw use the prefers card and have winamp use the other card and goldwave use the same card as winamp and so on. This is another way to configuration. Also if you use a sapi synthesizer you can determine witch card the sapi uses. Then the sapi synthesizer will only address that card. You need to have the latest version of the control panel to do this. Once this setting is maid it will apply to both sapi 4 and sapi 5. dectalk will not respect this setting. -----Original Message----- From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of Kay Malmquist Sent: Wednesday, April 21, 2004 3:51 PM To: jfw@xxxxxxxxxxxxx Subject: Re: other synthaasizers with JFW Is there anyway at all to get around this? I would really like to have Jaws on its own sound card and everything else on another. How about leaving Jaws on this one and having everything else use another one. Kay Malmquist kaylm@xxxxxxxxxxx ----- Original Message ----- From: "jim grimsby" <jim.grimsby@xxxxxxx> To: <jfw@xxxxxxxxxxxxx> Sent: Wednesday, April 21, 2004 3:42 PM Subject: RE: other synthaasizers with JFW It means that if you have two or more sound cards jaws with eloquence will allow to address the sound card of your choice. The dectalk access32 software driver that jaws uses does not allow this. -----Original Message----- From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of Sean McMahon Sent: Wednesday, April 21, 2004 10:35 AM To: jfw@xxxxxxxxxxxxx Subject: Re: other synthaasizers with JFW So what does addressing a static soundcard mean? Sean ----- Original Message ----- From: "jim grimsby" <jim.grimsby@xxxxxxx> To: <jfw@xxxxxxxxxxxxx> Sent: Tuesday, April 20, 2004 7:03 PM Subject: RE: other synthaasizers with JFW > Note to all. > Dectalk access 32 does not allow you to address a static sound card > like the jfw elaqwince driver does. To bad. > > -----Original Message----- > From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On > Behalf Of Kay Malmquist > Sent: Tuesday, April 20, 2004 4:07 PM > To: jfw@xxxxxxxxxxxxx > Subject: Re: other synthaasizers with JFW > > > I use it and it seems to respond just fine. It is the only symph I > really like. Kay Malmquist kaylm@xxxxxxxxxxx > ----- Original Message ----- > From: "Sean McMahon" <smcmahon@xxxxxxxx> > To: <jfw@xxxxxxxxxxxxx> > Sent: Tuesday, April 20, 2004 5:57 PM > Subject: Re: other synthaasizers with JFW > > > Is decktalk Access32 still sluggish in MSWord? I no this used to be > the case a very long time ago. > ----- Original Message ----- > From: "jim grimsby" <jim.grimsby@xxxxxxx> > To: <jfw@xxxxxxxxxxxxx> > Sent: Tuesday, April 20, 2004 2:34 PM > Subject: RE: other synthaasizers with JFW > > > > Any saip synthesizer will work dectalk access 32 works well and is > > what I use here. It works well and is responsive and is very clear I > > to have a hearing loss and find it works the best these days > > > > > > -----Original Message----- > > From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On > > Behalf Of wildfilly3 > > Sent: Sunday, April 11, 2004 7:45 PM > > To: jfw mailing list > > Subject: other synthaasizers with JFW > > > > > > Hello everyone, > > Does anyone know of a synthasizer other then eliquence that works > > with > > > JAWS 5? I have a moderate hearing loss and sometimes have a problem > > understanding what JAWS is saying. > > > > Thank You > > Alicia > > -- > > To post a message to the list, send it to jfw@xxxxxxxxxxxxx To > > unsubscribe from this mailing list, send a message to > > jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject > > line. Archives located at: //www.freelists.org/archives/jfw > > > > If you have any concerns about the list, post received from the > > list, or the way the list is being run, do not post them to the > > list. Rather > > > contact the list owner at jfw-admins@xxxxxxxxxxxxxx > > > > > > -- > > To post a message to the list, send it to jfw@xxxxxxxxxxxxx To > > unsubscribe from this mailing list, send a message to > jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject > line. > > Archives located at: //www.freelists.org/archives/jfw > > > > If you have any concerns about the list, post received from the > > list, or > the > way the list is being run, do not post them to the list. Rather > contact the list owner at jfw-admins@xxxxxxxxxxxxxx > > > > -- > To post a message to the list, send it to jfw@xxxxxxxxxxxxx To > unsubscribe from this mailing list, send a message to > jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject > line. Archives located at: //www.freelists.org/archives/jfw > > If you have any concerns about the list, post received from the list, > or the way the list is being run, do not post them to the list. Rather > contact the list owner at jfw-admins@xxxxxxxxxxxxxx > > -- > To post a message to the list, send it to jfw@xxxxxxxxxxxxx To > unsubscribe from this mailing list, send a message to > jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject > line. Archives located at: //www.freelists.org/archives/jfw > > If you have any concerns about the list, post received from the list, > or the way the list is being run, do not post them to the list. Rather > contact the list owner at jfw-admins@xxxxxxxxxxxxxx > > > -- > To post a message to the list, send it to jfw@xxxxxxxxxxxxx To > unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. > Archives located at: //www.freelists.org/archives/jfw > > If you have any concerns about the list, post received from the list, > or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx > -- To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx -- To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx -- To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx -- To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx