Evelyn, By "update version of JFW," do you mean JAWS 12? The suggestion I'm copying below, which works in JAWS 11, will have equivalent solutions in JAWS 12. The Graphics Options for JAWS are All, Labeled, or None. You can set these options temporarily in the Verbosity Dialog (Insert+V) or permanently for the particular application you are using in the JAWS Configuration Manager (Insert+numrow 6). When Graphics Mode is set to All, JAWS reads the ASCII value or number for that graphic. Most of the time, you will want to have the graphics in applications set to labeled only, and before you begin regularly using an application, you should use the automatic graphics labeler (Insert+Control+G and allow JAWS to try to label any of the graphics it can. All graphics mode is most helpful when you need to try to label all the graphics you can with the automatic graphics labeler or just some individual graphics with the individual graphics labeler (Insert+G. You will not hear any graphics numbers spoken when you set the graphics mode to labeled for your application, and so that's the mode you will want to use most of the time. _____ From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of Evelyn Sent: Friday, February 04, 2011 9:19 AM To: jfw@xxxxxxxxxxxxx Subject: jfw saying graphics Hello All, I hope this message finds you well. Could someone tell me how to get rid of jfw saying graphics? I'm using the update version of jfw. Thanks for your help.