Hi Grant, I'm using rbt40 with Jaws for years and currently with 5.0. 1. You can try to look in http://www.baum.de in their English version for such a manual, although I don't remember I've seen any in the past. If you have specific questions, ask me and I'll try to help. 2. I did not encounter the problem you described but please give more details. Is your display connected through a com port or usb? Mine is connected via com but I heard that newer displays have a usb connection. Recently, I do encounter a problem that my display freezes with no reason in the middle of work. Just seems as losing connection with the com port. In my case, the only solution so far is restart the computer. I'll move my display to com2 to see if the problem is in the specific com port. I suggest you also write to the pbd-l list (braille displays mailing list), you may get some feedback from there either. Currently I don't remember the address of this list, but if you need it I'll find it for you. Thanks, Rafi. -----Original Message----- From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of Grant Hardy Sent: Tuesday, December 09, 2003 3:04 AM To: jfw@xxxxxxxxxxxxx; JFWLite List Subject: Rabbit Questions Hello: I have two questions regarding a Rabbit (RBT) 40 Braille display with JAWS: 1) My Rabbit 40 is installed with version 6. Anyone know where I can find a current manual for that version? 2) Sometimes, when JAWS tries to detect the Braille display, the display simply freezes and requires a power off before it works properly. Any help would be appreciated. Grant To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.