RE: InfoPath Strange Edit Behavior

  • From: <Michael.Schulz@xxxxxxxx>
  • To: <jfw@xxxxxxxxxxxxx>
  • Date: Fri, 21 Nov 2008 14:39:14 +0100

Could you please support us by the output of jaws key + q which reads the used 
script during the opened application - please do this if you loaded jaws 9 on 
the one hand and jaws 7 on the other hand. Maybe different jaws scripts are 
loaded.
Regards, Michael

_________________________________________________________________
Diese Information ist ausschließlich für die adressierte Person oder 
Organisation bestimmt und könnte vertrauliches und/oder privilegiertes Material 
enthalten. Personen oder Organisationen, für die diese Information nicht 
bestimmt ist, ist es nicht gestattet, diese zu lesen, erneut zu übertragen, zu 
verbreiten, anderweitig zu verwenden oder sich durch sie veranlasst zu sehen, 
Maßnahmen irgendeiner Art zu ergreifen. Sollten Sie diese Nachricht irrtümlich 
erhalten haben, bitten wir Sie, sich mit dem Absender in Verbindung zu setzen 
und das Material von Ihrem Computer zu löschen. Wir weisen darauf hin, dass 
derartige Nachrichten mit und ohne Zutun von Dritten verloren gehen, verändert 
oder verfälscht werden können. Herkömmliche E-Mails sind nicht gegen den 
Zugriff von Dritten geschützt und deshalb ist auch die Vertraulichkeit unter 
Umständen nicht gewahrt. Wir haften deshalb nicht für die Unversehrtheit von 
E-Mails nachdem sie unseren Herrschaftsbereich verlassen haben und können Ihnen 
hieraus entstehende Schäden nicht ersetzen. Sollte trotz der von uns 
verwendeten Virus-Schutz-Programmen durch die Zusendung von E-Mails ein Virus 
in Ihre Systeme gelangen, haften wir nicht für eventuell hieraus entstehende 
Schäden. Dieser Haftungsausschluss gilt nur soweit gesetzlich zulässig.

The information transmitted is intended only for the person or entity to which 
it is addressed and may contain confidential and/or privileged material. Any 
review, retransmission, dissemination or other use of, or taking of any action 
in reliance upon, this information by persons or entities other than the 
intended recipient is prohibited. If you received this in error, please contact 
the sender and delete the material from any computer. We draw your attention to 
the fact that such messages can be lost, changed or falsified, with or without 
any interference by third persons. Normal e-mails are not protected against 
access by third persons and, therefore, their confidentiality may not be 
assured in certain circumstances. We cannot be responsible for the integrity of 
emails after they have left our sphere of control. We shall not, therefore, 
indemnify you for any damages resulting out of these circumstances. If, despite 
our use of anti-virus software, a virus enters your systems in connection with 
the sending of the e-mail, you may not hold us liable for any damages that may 
possibly arise in that connection. We will accept liability which by law we 
cannot exclude.
 
--- Begin Message ---
  • From: <Eric.Bergen@xxxxxxxxxxxxxxxx>
  • To: <jfw@xxxxxxxxxxxxx>
  • Date: Fri, 21 Nov 2008 14:28:34 +0100
The problem is that the edit field does not even show up so there is
Nowhere to press enter or the space bar.
Also, Ann, where in configuration manager would I find enhanced editing?
Thank you very much.
Eric.


-----Original Message-----
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On
Behalf Of Gene
Sent: Thursday, November 20, 2008 10:55 PM
To: jfw@xxxxxxxxxxxxx
Subject: RE: InfoPath Strange Edit Behavior

Try pressing the spacebar instead.

HTH

-----Original Message-----
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On
Behalf
Of Bergen, Eric
Sent: Wednesday, November 19, 2008 1:18 PM
To: jfw@xxxxxxxxxxxxx
Subject: InfoPath Strange Edit Behavior

Hello.

I am filling in a form using Microsoft Office InfoPath.

It is a work form and this is the application they are using so I cannot
change it.

When using Jaws 9, edit fields do not show up and I

Cannot hit enter to get into forms mode.

I can hit enter but it does not take me into forms mode.

When I press E to get the next edit field, it will take me there, but
will
not allow me to enter it.

When using Jaws 7, the edit fields show up correctly.

Has anyone seen this or do I need to change an option in version 9 to
see
these edit fields?

In IE, the edit fields show up fine using Jaws 9.

Jaws 10 is also not an option at this point.

I am using XP pro.

Any assistance or insight would be greatly appreciated.

Thank you.

Eric.

 


--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw

If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list. Rather
contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list: 
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to 
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw

If you have any concerns about the list, post received from the list, or the 
way the list is being run, do not post them to the list. Rather contact the 
list owner at jfw-admins@xxxxxxxxxxxxxx


--- End Message ---

Other related posts: