Fw: Jaws in Normal verses Print View?

From: "cheryll" <cheryll@xxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Date: Tue, 23 Jan 2007 04:59:39 -0800
Message
----- Original Message ----- 
From: Freedom Scientific Technical Support 
To: cheryll@xxxxxxxxxxx 
Cc: tickpub@xxxxxxxx 
Sent: Friday, January 19, 2007 9:16 PM
Subject: FW: Jaws in Normal verses Print View?


Dear  inquirers, 

Thank you for contacting Freedom Scientific technical Support.  I need you to 
provide more information. I need to know the exact versions of JAWS that's in 
use, the exact version of word and the operating system and video card on the 
unit. This will assist me in trouble shooting the item.

  Be sure to include all previous correspondence pertaining to this matter when 
replying to this message so that we might better
assist you. 

 Regards,
Tracey Jackson,
Technical Support Specialist
Freedom Scientific

Phone support: 727 803 8600, option #2
E-mail Support: support@xxxxxxxxxxxxxxxxxxxxx 
<mailto:support@xxxxxxxxxxxxxxxxxxxxx>
Visit our website at:
http://www.freedomscientific.com/

--------------------------------------------------------------------------------

From: cheryll [mailto:cheryll@xxxxxxxxxxx] 
Sent: Friday, January 19, 2007 6:12 AM
To: Freedom Scientific Technical Support
Subject: Fw: Jaws in Normal verses Print View?

 

 

----- Original Message ----- 

From: tickpub@xxxxxxxx 

To: jfw@xxxxxxxxxxxxx 

Sent: Wednesday, January 17, 2007 10:14 AM

Subject: Jaws in Normal verses Print View?

 

Normal verses Print view with Jaws

Hi all out there,

I do have a little sight left and like to use the Print View inside the View 
menu. I also run Magic which helps with my work in Word and certain articles 
and creations. But find that Jaws will not work all the time in Print View and 
this is weird. It will start out ok but as soon as I do a highlight or make a 
change like a cut or paste then it stops reading.

I then have to go back into View and change over to Normal. But under normal 
any graphics are not shown and the set up is different.

Does anyone know how I can get Jaws to read in the print view without turning 
off reading?

Wonder why Jaws will only read Normal and does not work well with anything else?

Is there a way around this.

 

Also in the view menu towards the bottom the Markup choice keeps getting 
checked, what causes this and when I uncheck it, everything works better. What 
is markup for and what does it actually do and how can I shut it off and make 
it stay off?

Thank you

MMM
Fw: Jaws in Normal verses Print View?

Other related posts:
