Re: Editing the JFW short cut keys?
- From: "George Marshall" <geom4@xxxxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Tue, 15 Feb 2005 10:47:07 -0500
Hi Jack & Dick:
The hot key is probably set in the JFW.exe rather than in the desk top icon.
Check the following:
1. From the desktop tab to start.
2. Hit "shift+F10".
3. Click on "open".
4. Select and click on "program"
5. Arrow down to "JAWS50" and enter.
6. Arrow down to "JAWS" and hit "alt+enter".
7. Arrow down to "short cut key".
8. See if "ctrl+alt+J" isn't in the short cut entry, if so clear it, tab to
"ok" and get out (back to desktop).
HTH,
George R. Marshall
geom4@xxxxxxxxxxxxx
----- Original Message -----
From: "Jack Lowe" <akronjack1982@xxxxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Monday, February 14, 2005 1:59 PM
Subject: Re: Editing the JFW short cut keys?
Hi Dick,
You have me stumped. What you could try is to give 6.0 a totally different
hot key. Follow the steps I sent to you. And rather than using the control
Alt J for version 6.0. Change it to control shift J.
Then, when you want Jaws 6.0 to start, you just hit control shift J and Jaws
6.0 should start. Jack
----- Original Message -----
From: "AB7HW Dick Lee Chrisman" <ab7hw@xxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Monday, February 14, 2005 12:48 PM
Subject: Re: Editing the JFW short cut keys?
> Hi Jack
> Thanks for answering my request!
> I followed your advice and in JFW 5.0 properties shows no hotkey.
> JFW 6.0 does show a hotkey control plus alt plus J.
> All of this looks right, but when I shut off JAWS and use control plus alt
> plus j it comes up in JFW 5.0?
> I again say I did go to the Desktop and on JFW 5.0 press alt plus enter
> and
> it show "none" for a hot key?
> Any ideas?
> Dick
> ----- Original Message -----
> From: "Jack Lowe" <akronjack1982@xxxxxxxxxxxxx>
> To: <jfw@xxxxxxxxxxxxx>
> Sent: Monday, February 14, 2005 5:08 AM
> Subject: Re: Editing the JFW short cut keys?
>
>
>> Hi Dick,
>>
>> Not a problem, here's how you do it...
>> first, you have to go to the desktop and find the old jaws shortcut. I
>> believe yours is 5.0. Here's what you have to do first.
>> 1. Hit alt enter on the Jaws 5.0 shortcut on your desktop.
>> 2. Tab to where it says shortcut key, hot key. It will probably say,
>> control + alt + J.
>> Back space this out so that there's no shortcut. You can check to see
>> if it's blank by doing an insert up arrow. it should say, none.
>> 3. Now tab to OK and hit enter. We had to remove that shortcut before we
>> can reassign it to 6.0.
>>
>> OK, now find the Jaws 6.0 shortcut on your desktop.
>> 1. Hit alt enter for the shortcut properties.
>> 2. Tab to where it says, shortcut key, hot key, none.
>> 3. Now press, control alt J all at the same time. You can make sure that
>> the shortcut is there by hitting insert up arrow. It should say, control
>> +
>> alt + J.
>> 4. Now tab to OK and hit enter. You're done. Now Jaws 6.0 should start
>> when you hit control alt J. Jack
>> ----- Original Message -----
>> From: "AB7HW Dick Lee Chrisman" <ab7hw@xxxxxxx>
>> To: <jfw@xxxxxxxxxxxxx>
>> Sent: Monday, February 14, 2005 6:55 AM
>> Subject: Editing the JFW short cut keys?
>>
>>
>>> Every time I up grade JFW I forget how to edit the two short cut keys,
>>> so
>>> that it brings up JFW 6.0?
>>> One is where you press "Windows Key" plus J and that re starts JFW.
>>> The second one is when you press control plus alt plus J and JFW
>>> restarts.
>>> Debbie once told me how, but I have succeeded in losing that
>>> information,
>>> Poop!
>>> Can you tell me how to edit these two short cut key methods to make JFW
>>> 6.0
>>> be the program that restarts when either set of key strokes are used?
>>> Now either of these methods brings up JFW 5.00.844.
>>> Dick
>>>
>>>
>>> --
>>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>>> To unsubscribe from this mailing list, send a message to
>>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>>> Archives located at: //www.freelists.org/archives/jfw
>>>
>>> If you have any concerns about the list, post received from the list, or
>>> the way the list is being run, do not post them to the list. Rather
>>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>>
>> --
>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>> To unsubscribe from this mailing list, send a message to
>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>> Archives located at: //www.freelists.org/archives/jfw
>>
>> If you have any concerns about the list, post received from the list, or
>> the way the list is being run, do not post them to the list. Rather
>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>
>
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
> the way the list is being run, do not post them to the list. Rather
> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
