RE: Artic Transport and JFW 6.0
- From: "Milton M. Ota" <mota@xxxxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Sun, 24 Apr 2005 19:56:14 -1000
Try using the setting 9600, 7,e,1
This may sound odd for com1
****************************************
Aloha:
Milton M. Ota
Associate Dealer, Hawaii
Island Computer Access Now ICAN
1318 Kanewai Street
Honolulu, Hawaii 96816-1718
E-mail: mota@xxxxxxxxxxxxx
Website: http://home.hawaii.rr.com/mota
Phone: (808) 734-0612
Cell: (808) 295-2528
========================================
-----Original Message-----
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf
Of Frank Welte
Sent: Sunday, April 24, 2005 7:16 PM
To: jfw@xxxxxxxxxxxxx
Subject: Artic Transport and JFW 6.0
My friend wants to run JAWS 6.0 using an Artic Transport external
synthesizer set to emmulate an Accent SA synthesizer as the primary
synthesizer.
Our initial attempt to install JAWS using this set-up failed. When we
re-started the computer the Transport would periodicly say something =
that
sounded like an error message. Sorry folks, I didn't write the message
down, but I've asked my friend to write it down and let me know what the
repeated message is, so I can share it with you here. In the mean-time, =
if
any of you are using the Artic Transport with JFW 6.0 can you tell me if
there are any particular special tricks required to get it to work? We =
used
the JFW guided instalations, we included the Accent SA on the list of
selected synthesizers, and We tried to run the Transport on Com1 with =
port
settings set to n-8-1. Recommendations for getting JFW working with =
this
little beastie will be most appreciated.
Best wishes,
Frank Welte
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
