Hi George, That's actually part of my problem. I can't get JFW to read the scan results, even with the PC Cursor. According to the helpful hints section on JFW lite, I should be able to, although it might not be updated to reflect 1.3. I'm running the interface optimized for Blind users, but to be honest I can't see any difference. DSO has been mentioned to me earlier on this evening, so I'm pretty sure that's the culprit. Cheers, Mark Mark Matthews E-mail: mark.matthews53@xxxxxxxxxxxx MSN/Windows Messenger: markmatthews3@xxxxxxxxxxx Webpage: http://www.qsl.net/gw0wgk -----Original Message----- From: jaws-uk-bounce@xxxxxxxxxxxxx [mailto:jaws-uk-bounce@xxxxxxxxxxxxx] On Behalf Of George Bell Sent: Tuesday, December 14, 2004 11:28 PM To: jaws-uk@xxxxxxxxxxxxx Subject: [jaws-uk] Re: Spybot 1.3 problem Hi Mark, What are the specific Names. If "DSO" is one of them, so long as your system is up to date with Critical Updates, there's no need to worry. George. -----Original Message----- From: jaws-uk-bounce@xxxxxxxxxxxxx [mailto:jaws-uk-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Matthews Sent: 14 December 2004 15:51 To: jaws-uk@xxxxxxxxxxxxx Subject: [jaws-uk] Spybot 1.3 problem Hi, I seem to be having some difficulty using Spybot 1.3, or it could be something that's just stuck on my system. I run the scan, and in the most recent case 5 problems were found. I fix the probblmes in the usual way, and get confirmation that the problems have been fixed. I run another scan again just to make sure, but the results are still the same. Looking in the Recovery section is rather fruitless, as all I get announced together with a lot of graphical numbers is how to deal with the scan results. Running JFW 4.51, with the interface for Blind users turned on. Cheers, Mark Mark Matthews E-mail: mark.matthews53@xxxxxxxxxxxx MSN/Windows Messenger: markmatthews3@xxxxxxxxxxx Webpage: http://www.qsl.net/gw0wgk ** To leave the list, click on the immediately-following link:- ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=subscribe] ** If this link doesn't work then send a message to: ** jaws-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subjectúq] ** or send a message, to ** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq This Message has been scanned for viruses by McAfee Groupshield. ** To leave the list, click on the immediately-following link:- ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=subscribe] ** If this link doesn't work then send a message to: ** jaws-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subjectq] ** or send a message, to ** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** jaws-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subjectúq] ** or send a message, to ** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq