[jaws-uk] Re: JAWS Crashing When Using K1000
- From: "Ann Hamilton" <ann-s.hamilton@xxxxxxxxxxxx>
- To: <jaws-uk@xxxxxxxxxxxxx>
- Date: Thu, 20 Jul 2006 09:15:13 +0100
Tiddy
Yes, JAWS sleep mode is indeed enabled when using K1K. I've been reduced to
bodging about unloading and reloading JAWS when I need to but it's a pain in
the proverbial! (smile)
Thanks
Ann
----- Original Message -----
From: "TIDDYogg" <oggy@xxxxxxxxxxxxxx>
To: <jaws-uk@xxxxxxxxxxxxx>
Sent: Thursday, July 20, 2006 7:54 AM
Subject: [jaws-uk] Re: JAWS Crashing When Using K1000
Hi Ann, I assume you have told Jaws to kill speech while you're in
K1000. If not, you can do it in the config manager somehow. The
simpler bodge is simply to unload Jaws before you start Kurzweil. As
long as you have short cuts on the desk top for each program you should
be able to start either of them without speech. I'll go into more
detail if necessary.
Ann Hamilton wrote:
> I have K1000 9.03 with IBM Via-Voice as my default reading and message
> voice.
> JAWS 7.0, XP Home, 1.8 processor with 512Mb ram.
> Creative SB Live sound card and VIA/S3G UniChrome Pro IGP on-board
> graphics.
> When using continuous read, I get the program error sound and then when I
> switch focus away from Kurzweil, I find that JAWS has crashed.
> I've tried using Neo speech for both reading and message voices but the
> problem persists.
> I've had the same results when running JAWS versions 4.51, and 5.0
> Advice from the K1000 list seems to point to this being a JFW rather than
> a Kurzweil issue as "JFW's use of Eloquence as a SAPI engine is invisible
> to K1000..."
> So, any advice on how to proceed would be most welcome.
>
> tia
> Ann
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** jaws-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** jaws-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.10.2/393 - Release Date: 19/07/2006
** To leave the list, click on the immediately-following link:-
** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** jaws-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
