In message <150f077d4e.dougjwebb@xxxxxxxxxxxxxxx> Doug Webb <doug.j.webb@xxxxxxxxxxxxxx> wrote: > In message <7631037d4e.druck@xxxxxxxxxxxxxxxx> > "David J. Ruck" <druck@xxxxxxxxxxxx> wrote: > >> On 28 Oct 2006 Doug Webb <doug.j.webb@xxxxxxxxxxxxxx> wrote: >>> I upgraded to RISCOS5.12 but did not upgrade to a FX5200 card until >>> today. I now notice screen corruption if I try to use certain games >>> like StarFighter and !TwinWorld. The screen seems to have alternative >>> columns of unaligned graphics. >>> >>> After consulting with Chris Brazley and did a further test and found >>> that I can induce the same effect by selecting Mode13. If you grab the >>> screen in !Paint and then change back to the normal mode you can >>> restore the corruption. Also if you view the saved Mode13 screen shot >>> it appears Ok so it does point to something being amiss. >> >> Its something up with the horizontal pixel doubling that has to be done to >> display such a low horizontal resolution mode on a modern graphics card. >> >> Cheers >> ---Dave >> > Hi, > > Well after some experiments I have got it to display ok in 320X256 > mode 13. It appears that their is a difference with the new cards > ability to display things and by altering the monitor definition file > it now displays OK in Mode13. Starfighter now display OK and though I > had to alter Twinworld to use 320X480@75hz to work Ok as the automode > selection still causes a problem. > > I have a HannG model supplied by Castle so I wonder if the they have > updated their MDF's to take into account FX5200 card differences? > > Doug > Is it possible for an average user to make TwinWorld work, and if so can you tell me how to do it? -- JayCee --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support