[isapros] Re: Port Query
- From: "Young, Gerald G" <Gerald.Young@xxxxxxxxxx>
- To: <isapros@xxxxxxxxxxxxx>
- Date: Tue, 20 Jun 2006 13:59:33 -0500
Amy,
Try portqry -n 70.238.77.130 -p tcp -e 3389
Jerry
________________________________
From: isapros-bounce@xxxxxxxxxxxxx [mailto:isapros-bounce@xxxxxxxxxxxxx]
On Behalf Of Amy Babinchak
Sent: Tuesday, June 20, 2006 2:41 PM
To: isapros@xxxxxxxxxxxxx
Subject: [isapros] Port Query
E:\>portqry -n 70.238.77.130 -p tcp 3389
'portqry' is not recognized as an internal or external command,
operable program or batch file.
E:\>portqry.exe -n 70.238.77.130 -p tcp 3389
'portqry.exe' is not recognized as an internal or external command,
operable program or batch file.
E:\>e:\portqryv2\portqry.exe -n 70.238.77.130 -p tcp 3389
PortQry version 2.0
Displays the state of TCP and UDP ports
Command line mode: portqry -n name_to_query [-options]
Interactive mode: portqry -i [-n name_to_query] [-options]
Local Mode: portqry -local | -wpid pid| -wport port [-options]
Command line mode:
portqry -n name_to_query [-p protocol] [-e || -r || -o endpoint(s)] [-q]
[-l logfile] [-sp source_port] [-sl] [-cn SNMP community name]
Command line mode options explained:
-n [name_to_query] IP address or name of system to query
-p [protocol] TCP or UDP or BOTH (default is TCP)
-e [endpoint] single port to query (valid range: 1-65535)
-r [end point range] range of ports to query (start:end)
-o [end point order] range of ports to query in an order (x,y,z)
-l [logfile] name of text log file to create
-y overwrites existing text log file without prompting
-sp [source port] initial source port to use for query
-sl 'slow link delay' waits longer for UDP replies from remote
systems
-nr by-passes default IP address-to-name resolution
ignored unless an IP address is specified after -n
-cn specifies SNMP community name for query
ignored unless querying an SNMP port
must be delimited with !
-q 'quiet' operation runs with no output
returns 0 if port is listening
returns 1 if port is not listening
returns 2 if port is listening or filtered
Notes: PortQry runs on Windows 2000 and later systems
Defaults: TCP, port 80, no log file, slow link delay off
Hit Ctrl-c to terminate prematurely
examples:
portqry -n myserver.com -e 25
portqry -n 10.0.0.1 -e 53 -p UDP -i
portqry -n host1.dev.reskit.com -r 21:445
portqry -n 10.0.0.1 -o 25,445,1024 -p both -sp 53
portqry -n host2 -cn !my community name! -e 161 -p udp
Interactive Mode:
Used as an alternative to command line mode
portqry -i [-options]
For help with Interactive mode options:
- run portqry.exe
- then type 'help' <enter>
example:
portqry -i -n server1 -e 135 -p both
Local Mode:
Local Mode used to get detailed data on local system's ports
portqry -local | -wpid pid | -wport port [-wt seconds] [-l logfile] [-v]
Local mode options explained:
-local enumerates local port usage, port to process mapping,
service port usage, and lists loaded modules
-wport [port_number] watches specified port
reports when port's connection status changes
-wpid [process_ID] watches specified process ID (PID)
reports when PID's connection status changes
-wt [seconds] watch time option
specifies how often to check for status changes
valid range: 1 - 1200 seconds
default value is 60 seconds
-l [logfile] name of text log file to create
-v requests verbose output
Notes: PortQry runs on Windows 2000 and later systems
For best results run in context of local administrator
Port to process mapping may not be available on all systems
Hit Ctrl-c to terminate prematurely
examples:
portqry -local
portqry -local -l logfile.txt -v
portqry -wpid 1272 -wt 5 -l logfile.txt -y -v
portqry -wport 53 -l dnslog.txt
E:\>e:\portqryv2\portqry -n 70.238.77.130 -p tcp 3389
PortQry version 2.0
Displays the state of TCP and UDP ports
Command line mode: portqry -n name_to_query [-options]
Interactive mode: portqry -i [-n name_to_query] [-options]
Local Mode: portqry -local | -wpid pid| -wport port [-options]
Command line mode:
portqry -n name_to_query [-p protocol] [-e || -r || -o endpoint(s)] [-q]
[-l logfile] [-sp source_port] [-sl] [-cn SNMP community name]
Command line mode options explained:
-n [name_to_query] IP address or name of system to query
-p [protocol] TCP or UDP or BOTH (default is TCP)
-e [endpoint] single port to query (valid range: 1-65535)
-r [end point range] range of ports to query (start:end)
-o [end point order] range of ports to query in an order (x,y,z)
-l [logfile] name of text log file to create
-y overwrites existing text log file without prompting
-sp [source port] initial source port to use for query
-sl 'slow link delay' waits longer for UDP replies from remote
systems
-nr by-passes default IP address-to-name resolution
ignored unless an IP address is specified after -n
-cn specifies SNMP community name for query
ignored unless querying an SNMP port
must be delimited with !
-q 'quiet' operation runs with no output
returns 0 if port is listening
returns 1 if port is not listening
returns 2 if port is listening or filtered
Notes: PortQry runs on Windows 2000 and later systems
Defaults: TCP, port 80, no log file, slow link delay off
Hit Ctrl-c to terminate prematurely
examples:
portqry -n myserver.com -e 25
portqry -n 10.0.0.1 -e 53 -p UDP -i
portqry -n host1.dev.reskit.com -r 21:445
portqry -n 10.0.0.1 -o 25,445,1024 -p both -sp 53
portqry -n host2 -cn !my community name! -e 161 -p udp
Interactive Mode:
Used as an alternative to command line mode
portqry -i [-options]
For help with Interactive mode options:
- run portqry.exe
- then type 'help' <enter>
example:
portqry -i -n server1 -e 135 -p both
Local Mode:
Local Mode used to get detailed data on local system's ports
portqry -local | -wpid pid | -wport port [-wt seconds] [-l logfile] [-v]
Local mode options explained:
-local enumerates local port usage, port to process mapping,
service port usage, and lists loaded modules
-wport [port_number] watches specified port
reports when port's connection status changes
-wpid [process_ID] watches specified process ID (PID)
reports when PID's connection status changes
-wt [seconds] watch time option
specifies how often to check for status changes
valid range: 1 - 1200 seconds
default value is 60 seconds
-l [logfile] name of text log file to create
-v requests verbose output
Notes: PortQry runs on Windows 2000 and later systems
For best results run in context of local administrator
Port to process mapping may not be available on all systems
Hit Ctrl-c to terminate prematurely
examples:
portqry -local
portqry -local -l logfile.txt -v
portqry -wpid 1272 -wt 5 -l logfile.txt -y -v
portqry -wport 53 -l dnslog.txt
E:\>e:\portqryv2\portqry -n 70.238.77.130 -p tcp 3389
PortQry version 2.0
Displays the state of TCP and UDP ports
Command line mode: portqry -n name_to_query [-options]
Interactive mode: portqry -i [-n name_to_query] [-options]
Local Mode: portqry -local | -wpid pid| -wport port [-options]
Command line mode:
portqry -n name_to_query [-p protocol] [-e || -r || -o endpoint(s)] [-q]
[-l logfile] [-sp source_port] [-sl] [-cn SNMP community name]
Command line mode options explained:
-n [name_to_query] IP address or name of system to query
-p [protocol] TCP or UDP or BOTH (default is TCP)
-e [endpoint] single port to query (valid range: 1-65535)
-r [end point range] range of ports to query (start:end)
-o [end point order] range of ports to query in an order (x,y,z)
-l [logfile] name of text log file to create
-y overwrites existing text log file without prompting
-sp [source port] initial source port to use for query
-sl 'slow link delay' waits longer for UDP replies from remote
systems
-nr by-passes default IP address-to-name resolution
ignored unless an IP address is specified after -n
-cn specifies SNMP community name for query
ignored unless querying an SNMP port
must be delimited with !
-q 'quiet' operation runs with no output
returns 0 if port is listening
returns 1 if port is not listening
returns 2 if port is listening or filtered
Notes: PortQry runs on Windows 2000 and later systems
Defaults: TCP, port 80, no log file, slow link delay off
Hit Ctrl-c to terminate prematurely
examples:
portqry -n myserver.com -e 25
portqry -n 10.0.0.1 -e 53 -p UDP -i
portqry -n host1.dev.reskit.com -r 21:445
portqry -n 10.0.0.1 -o 25,445,1024 -p both -sp 53
portqry -n host2 -cn !my community name! -e 161 -p udp
Interactive Mode:
Used as an alternative to command line mode
portqry -i [-options]
For help with Interactive mode options:
- run portqry.exe
- then type 'help' <enter>
example:
portqry -i -n server1 -e 135 -p both
Local Mode:
Local Mode used to get detailed data on local system's ports
What's wrong with my portqry? All I get from this line is the help file.
I'm not sure where the error is.
E:\>e:\portqryv2\portqry.exe -n 70.238.77.130 -p tcp 3389
Thanks,
Amy
All mail to and from this domain is GFI-scanned.
Other related posts:
