For the Exchange look at the tutorials and find the exchange selection for rpc there you can find out that, there is a way out. For the rest I agree on Jim ISA is not designed to be working like that. But however it works. Regards Mario de Jonge _____________________________________________________________ Hi Jim, thanks for responding, perhaps my diagram was not clear, network A and network b are connected to the ISA box, each network is connected to one of the interfaces in the ISA box. Then each server is connected to one of the two switch stacks. Thanks Jim Scolman http://www.ISAserver.org ISA actually makes a poor router; that's not what it was designed to do. If you want it to serve Internet content to both of those networks, then you should connect them as: NetA NetB | | -------|--------- ISA ..if this isn't possible, install RRAS as a LAN rout on the ISA and let it handle the NetA - NetB traffic, while ISA handles the Internet stuff. Jim Harrison MCP(NT4, W2K), A+, Network+, PCG http://isaserver.org/pages/author_index.asp?aut=3 http://isatools.org Read the help / books / articles! ----- Original Message ----- From: "Jim Scolman" <jim.scolman@xxxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Thursday, October 24, 2002 12:29 PM Subject: [isalist] ...newcomer questions..... http://www.ISAserver.org This is a multi-part message in MIME format. ------------------------------------------------------------------------ ---- ---- Hello All, I am new to the list and new to ISA server. I am an Admin with a school district, and inherited an ISA server at one of my schools. Here is the layout; Workstation group A, server A switch stack A, network A IAS Proxy Server switch stack B, network B Workstation group B, server B Network A is a "stand alone" LAN, working through switch stack A. Network B is connected to the school district WAN via a fiber connection to the school MDF, and T1 to the district data center. One of the ISA server interfaces is connected to switch stack A, and the other is connected to switch stack B. Network A can connect to the Internet and connect to server A, but to nothing else on the "other" side of the proxy. Network B can "see" all of the District WAN but none of LAN A. I was told the sole purpose of installing the proxy server was to enable the teachers on LAN A to "cut off" Internet access to workstation group A. I have looked at the various Rules, etc on the proxy and there is a "No Internet" rule. All of the appropriate protocol filters and rules seem to be configured and working. TCP/IP protocols, ICMP, etc are allowed, but I cannot ping from LAN A to the "outside". Another issue is District eMail for the teachers on LAN A, I have researched the subject and learned that MS Outlook will not work "thru" the Proxy. The main issue is this; if I connect the teacher workstations to LAN B, they have eMail and access to the district WAN but NO ACCESS to LAN A. The teacher on LAN B has access to eMail, the district WAN AND TO LAN A! I cannot find any configuration in the IAS that is causing this situation. Routing is not turned on in the IAS proxy, I have experimented with is but it seems to require an IAS server on each side of the route or tunnel. Can the IAS work as a router between these two LANs and still offer the Internet protection required of LAN A ? I have done much research and reading on IAS and I not been able to answer my questions. I hope this is enough information for one of you to help. Thanks for your patience and expertise. Sincerely Jim Scolman. Jim Scolman Technology Contractor 206-972-1431 jim.scolman@xxxxxxxxxxxxx "if you can keep your head when all those around you......"