RE: any ideas about this error
- From: "Thomas W Shinder" <tshinder@xxxxxxxxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Tue, 7 Jan 2003 19:59:39 -0600
Hi Tarundeep,
How often are you seeing this error? If you are seeing it often, you
should consider deleting and recreating the cache file, increasing the
amount of RAM, doing a chkdsk on the drive containing the cache, and
checking your UPS.
HTH<
Tom
www.isaserver.org/shinder
-----Original Message-----
From: tarundeep [mailto:tsingh@xxxxxxxxxxxx]
Sent: Monday, January 06, 2003 9:53 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] any ideas about this error
http://www.ISAserver.org
Disk cache C:\urlcache\dir1.cdat failed to initialize. Some errors were
encountered when ISA Server restored specific data cache files. ISA
Server
will now attempt to recover these files. These errors may have occurred
because there was not enough time to complete all necessary shutdown
operations, when ISA Server was previously shut down. To avoid this in
future, you can increase the value of the
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\WaitToKillServiceTim
eout
registry key. Identify the reason for cache failure by examining
previous
recorded events, or the error code. The error code in the Data area of
the
event properties indicates the cause of the failure (internal code:
503.6225.3.0.1200.0).
------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Exchange Server Resource Site: http://www.msexchange.org/
Windows Security Resource Site: http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
tshinder@xxxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
