I am trying to access an RRAS VPN on a remote Win2k box, from behind my ISA server. When I try to open the connection, I get a "destination unreachable" error. I can reach the destination using other protocols, e.g. telnet, terminal services, etc. On the ISA, I have a protocol rule allowing all IP traffic, and I have a packet filter for PPTP call. In my Packet Filter properties, I have IP routing enabled, as well as PPTP through firewall. Why can't I connect? Thanks Nick Chadwick Development & Technical Support Manager Comsoft Limited, UK Tel: +44-(0)20-8240-4452 Fax: +44-(0)20-8240-4449 Mobile: +44-(0)7740-362408 Email: nick@xxxxxxxxxxxxxx <mailto:nick@xxxxxxxxxxxxxx> Web: http://www.comsoft.ltd.uk/ -----Original Message----- From: Shamshad Ahmad [mailto:sahmad@xxxxxxxxx] Sent: 13 September 2001 09:24 To: [ISAserver.org Discussion List] Subject: [isalist] RE: iMesh - Socks v4 http://www.ISAserver.org This is a multi-part message in MIME format. ********************************************************************** Disclaimer: This e-mail contains proprietary information some or all of which may be legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then permanently delete the message from your computer. If you are not the intended recipient you must not use, disclose, distribute, copy, print or rely on the e-mail. The opinion expressed in this Email is that of the author and not necessarily that of Comsoft Limited. While attachments are virus checked, Comsoft Limited do not accept any liability in respect of a virus which is not detected. **********************************************************************