Re: TSAC publish via ISA
- From: Cornerstone Christian School <ccschooltech@xxxxxxx>
- To: "'[ISAserver.org Discussion List]'" <isalist@xxxxxxxxxxxxx>
- Date: Fri, 07 Jun 2002 13:53:05 -0700
Good point.... Was just showing that it can be easily done....
SR
-----Original Message-----
From: Steve Moffat [mailto:steve@xxxxxxxxxxxxxxx]
Sent: Friday, June 07, 2002 12:29 PM
To: [ISAserver.org Discussion List]
Subject: RE: [isalist] Re: TSAC publish via ISA
If i was you, i would change the port that TS is listening on to further
enhance your security.
Steve
-----Original Message-----
From: Cornerstone Christian School [mailto:ccschooltech@xxxxxxx]
Sent: Fri 07/06/2002 04:26 PM
To: [ISAserver.org Discussion List]
Cc:
Subject: [isalist] Re: TSAC publish via ISA
http://www.ISAserver.org
Lightly followed this link.....
What we did was....
Step 1. Create a Protocol definition (TS IN) using Port # 3389 TCP
Inbound
Step 2. Create an IP Packet Filter Custom, Inbound, Fixed Port 3389,
Remote Port All
Step 3. Published the Server Used internal IP address for the server
x.x.x.x, mapped to external IP of ISA server x.x.x.x and using Mapped
Protocol TS IN (created in Step 1!)
Works for us.
Used the same idea for FTP server and SSH server.
-----Original Message-----
From: Jim Harrison [mailto:jim@xxxxxxxxxxxx]
Sent: Friday, June 07, 2002 11:40 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: TSAC publish via ISA
http://www.ISAserver.org
The TSAC client has to be able to resolve the name you enter there.
If it can't, no connection.
Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/authors/harrison/
Read the books!
----- Original Message -----
From: Rogers, Brian
To: [ISAserver.org Discussion List]
Sent: Friday, June 07, 2002 11:29 AM
Subject: [isalist] Re: TSAC publish via ISA
http://www.ISAserver.org
I was at the beginning....the only way I could get it to work was to
enter in the DNS name of the published IP address on the ISA server.
Very odd :/
Brian W. Rogers
MCSE, MCT, MCP
Client/Server Network Developer
Tree of Life Corporation
rogersb@xxxxxxxxxxxxxx
office: (904)940-2152
mobile: (904)806-7173
-----Original Message-----
From: Jim Harrison [mailto:jim@xxxxxxxxxxxx]
Sent: Friday, June 07, 2002 1:43 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: TSAC publish via ISA
http://www.ISAserver.org
Are you entering a server name in the UI?
Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/authors/harrison/
Read the books!
----- Original Message -----
From: Rogers, Brian
To: [ISAserver.org Discussion List]
Sent: Thursday, June 06, 2002 3:04 PM
Subject: [isalist] TSAC publish via ISA
http://www.ISAserver.org
Ok, I followed the article posted in the learning zone and thought I had
it configured properly.
However whenever anyone attempts to connect to a terminal server after
browsing to the TSAC login page, an immediate response of "Error
connecting to terminal server" is returned.
According to a KB article this error deals with name resolution. I have
re-verified that 3389 is open...and the TSAC client works when you
browse to it directly instead of through the firewall.
Any ideas? :/
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
rogersb@xxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
ccschooltech@xxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
steve@xxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
