TS RDP Session With client address set enabled.
- From: "Henri Vissers" <henri@xxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Wed, 5 Sep 2001 13:42:43 +0200
Subject: TS RDP Session With client address set enabled.
1)
The problem is that i always have to dialout manualy after a reboot otherwise
the external ip is not there when isa starts.
I dialout manualy and restart the services. Then the external ip is known to
isa and publishing works fine. When i disconnect
the line manualy, and go on browsing for example isa dialouts for me that
part works fine.
Do i have to configure RRas insteadt of ras ?
2) This one is the biggest problem. I published rdp (internal Terminal
server) works fine, only the client address sets doesnt work
i can connect from every ip. Not only from the client address sets i defined.
Tested this situation when i have a cable connection
the client address set works fine. but when i have the vpn connection for
adsl the client address set don't work.
Do the client address set works when i use rras??
Below an ipconfig /all of the isa machine.
Windows 2000 IP Configuration
Host Name . . . . . . . . . . . . : s02-xxx
Primary DNS Suffix . . . . . . . : xxx
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : xxx
Ethernet adapter Extern:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 3Com EtherLink XL 10/100 PCI For
Complete PC Management NIC (3C905C-TX)
Physical Address. . . . . . . . . : 00-04-76-0E-6D-27
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.0.0.139
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled
Ethernet adapter Intern:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Compaq NC3161 Fast Ethernet NIC
Physical Address. . . . . . . . . : 00-50-8B-33-A7-12
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.15.26
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.15.25
PPP adapter Mxstream:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-53-45-00-00-00
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 213.84.xxx.xxx
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 213.84.xxx.xxx
DNS Servers . . . . . . . . . . . : 194.109.104.104
194.109.6.66
NetBIOS over Tcpip. . . . . . . . : Disabled
----- Original Message -----
From: Henri Vissers
To: [ISAserver.org Discussion List]
Sent: Monday, September 03, 2001 5:48 PM
Subject: Re: [isalist] Re: TS RDP Session With client address set enabled.
Yes, i restarted the services. DSL here works as follows.
It setups a kind of vpn connection. When i reboot the server
i have to manualy dialout the vpn connection before starting isa server
otherwise the smtp service doesnt publish ok. Cause is that the external ip
isnt known to the isa server if it isnt dialout already before starting the
services.
Any ideas?
now i can connect from any ip. that;s now what is want?
----- Original Message -----
From: Jim Harrison
To: [ISAserver.org Discussion List]
Sent: Monday, September 03, 2001 5:15 PM
Subject: [isalist] Re: TS RDP Session With client address set enabled.
http://www.ISAserver.org
This should be working for you.
How long after you made the settings did you wait?
Did you restart the firewall service after making changes?
Are the IPs internal or external?
Is NAT involved in your DSL setup?
Jim Harrison
MCP(2K), A+, Network+, PCG
----- Original Message -----
From: Henri Vissers
To: [ISAserver.org Discussion List]
Sent: Monday, September 03, 2001 7:51 AM
Subject: [isalist] TS RDP Session With client address set enabled.
http://www.ISAserver.org
Situation:
No terminal services installed on isa server,
internal server with terminal services installed is published,
Only login is allowed for certain fixed ip. Created client address set
with the secure ips. And bound the client address set to the published rule for
RDP.
But login is possible from still every IP? What is going wrong? Did
this before for ica and that worked fine??
Different from previously install is that i'm using adsl now.
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
henri@xxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
