Hi Dar, That is correct. However, it appears to be somewhat "flakey" and I haven't heard must positive responses about the filter. In my own experiences with it, I found that it didn't work (but then, I didn't need it to work :-) HTH, Tom www.isaserver.org/shinder -----Original Message----- From: Dar Scott [mailto:dsc@xxxxxxxx] Sent: Wednesday, December 26, 2001 11:39 AM To: [ISAserver.org Discussion List] Subject: [isalist] Re: SOCKS Enhanced Support? http://www.ISAserver.org At 10:19 AM -0500 12/26/01, Craft, Steve wrote: >I used to work with MSP2.0 which only had SOCKSv4 support. When I >finally looked at the SOCKS support from ISA, I saw... v4 again. I >am guessing that MS is not going to support 5, which makes life >harder to get ISA in front of Mac/*nix systems. Does anyone know of >any workarounds/etc for getting SOCKS5 to work with ISA? My copy of Shinder et al says that there is a SOCKS5 application filter in ISA SDK on the ISA Server CD. (I had noted that when I thought I needed SOCKS5.) Dar Scott Programmer ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')