Hi John, You can check out the www.arin.net database. Also, I believe there a plenty of tracert tools that provide this feature. HTH, Tom www.isaserver.org/shinder -----Original Message----- From: John Burridge [mailto:j.burridge@xxxxxxxxx] Sent: Friday, March 08, 2002 10:15 AM To: [ISAserver.org Discussion List] Subject: [isalist] Reporting on Logs http://www.ISAserver.org I am logging the ISA logs into a database. At the moment I run queries on that every month to get relevant usage stats. One thing I wanted to do was to be able to see which continent each IP address belongs to. Is there a list out there that tells you this? (Obviously not by each individual IP :) Cheers, John -----Original Message----- From: Randy Sieren [mailto:rsieren@xxxxxxxxxxxxxxxxx] Sent: 08 March 2002 15:40 To: [ISAserver.org Discussion List] Subject: [isalist] GrabURL Program? http://www.ISAserver.org Hello, I have installed an ISA Server for a customer and everything is working great but two things. Any help would be greatly appreciated!! I read through the ISA Server Org book, and can't find anything. 1. They have a program that uses a program called "GrabURL and GetURL" They only use port 80, but no matter what type of ISA client I use, they will not go through the ISA Server. It simply times out every time. It works fine to NAT, without a firewall. Any Suggestions? The rule I have right now is allow all traffic to the entire LAN network. 2. Every time I run a report to check on Usage/Visited Sites/Etc, sites visited, my reports come back with no data. Thanks in advance and have a great weekend. Randy Sieren ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jburridge@xxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')