RE: QoS and Tunnel

  • From: "Thomas W. Shinder" <tshinder@xxxxxxxxxxxxxxxxxx>
  • To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
  • Date: Tue, 23 Apr 2002 12:02:30 -0500

Hi David,

Won't work. ISA Server doesn't manage VPNs. Just creates packet filters.

HTH,
Tom
www.isaserver.org/shinder


-----Original Message-----
From: David Pokorny [mailto:david.pokorny@xxxxxxxx] 
Sent: Tuesday, April 23, 2002 9:20 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] QoS and Tunnel

http://www.ISAserver.org


Hi,

I have problem with QoS on ISA server.
My configuration is W2K+SP2;standart ISA server +SP1;2xNics-NIC1 is
connected to local LAN and NIC2 is connected to ISP, server is
standalone.
I also use the IPsec tunnel with another ISA server on other location.
All is working fine-Web access to Internet by clients, communication by
tunnel between two my LANs-all is fine.
I would like to use the QoS /bandwith/control  for Internet and Tunnel
communications.
I set bandwith rules and everything setting for bandwith rules but for
tunnel communication QoS service does not work.
I looked to ISA server Logs and there is only info about tunnel
communication -port 500 nad 1701, source and destination address and
that
all. When I set this values to the bandwith rules-QoS is not working. I
try
everything settings about bandwith rules but only Internet access I can
control by QoS /bandwith control/.
QoS service is binded on the both network adapters NIC1 and NIC2 and
also
in
RRAS on L2TP interface.

if possible How Can I use to bandwith control on the tunnel
communication
on
the ISA servers ??

Thank you for your help

David Pokorny





------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
tshinder@xxxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')


Other related posts: