Re: Problem since SP1, can someone help

From: Paul Crisp <PCrisp@xxxxxxxxxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Date: Tue, 19 Feb 2002 14:55:06 -0000

You're correct Jim ( Doh! should have tried that first )
 
No it doesn't so must be something else. It seems that the remote office
is experimenting with IPSec for a connection to an external business,
could this affect the VPN ?
 
Paul Crisp

----- Original Message ----- 
From: Jim Harrison <mailto:jim@xxxxxxxxxxxx>  
To: [ISAserver.org Discussion List] <mailto:isalist@xxxxxxxxxxxxx>  
Sent: Tuesday, February 19, 2002 2:41 PM
Subject: [isalist] Re: Problem since SP1, can someone help

http://www.ISAserver.org <http://www.ISAserver.org> 


Hi Paul, 
 
    Does the problem go away if you remove SP1A?
    You're right; SP1A shouldn't affect your VPN settings.  I'd be very
surprised if it did.
 
Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/authors/harrison/
<http://isaserver.org/authors/harrison/> 
Read the books!


----- Original Message ----- 
From: Paul Crisp <mailto:PCrisp@xxxxxxxxxxxxxxxxx>  
To: [ISAserver.org Discussion List] <mailto:isalist@xxxxxxxxxxxxx>  
Sent: Tuesday, February 19, 2002 04:51
Subject: [isalist] Problem since SP1, can someone help

http://www.ISAserver.org <http://www.ISAserver.org> 



This is a multi-part message in MIME format.




  _____  




Could be coincidence, but seems strange. 
 
We previously had a VPN server to server working no problems. The new
SP1 was installed last night, and I'm now getting this error appearing
in the event log :-
 
Source: RemoteAccess
EventID: 20111
 
A Demand Dial connection to the remote interface MBWP_SI on port VPN4-8
was successfully initiated but failed to complete successfully because
of the following error: The connection attempt failed because your
computer and the remote computer could not agree on PPP control
protocols.
 
As you can probably see, I'm using PPP rather than IPSEC
 
Please help
 
Paul Crisp
Snr network support analyst
Metal Bulletin plc



  _____  




------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')


------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
pcrisp@xxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')

Re: Problem since SP1, can someone help

Other related posts: