RE: ISA North Interface not assigned and IP address
- From: "Thomas W Shinder" <tshinder@xxxxxxxxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Tue, 18 Nov 2003 18:08:27 -0600
Hi Adminone,
Have you enabled the DHCP client packet filter?
HTH,
Tom
-----Original Message-----
From: adminone [mailto:adminone@xxxxxxxxxxx]
Sent: Monday, November 17, 2003 8:21 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] ISA North Interface not assigned and IP address
http://www.ISAserver.org
I am currently using an ISA server behind the linksys router. It is
primarily used for cache even though I have it installed in integrated
mode. In any case, I removed the linksys router and decided to put the
ISA server at the edge of my network. I connected the External Interface
to the cable modem and the internal interface to a hub that connects my
internal network. I rooted both the cable modem and the ISA server but
the external NIC was not assigned an IP address. It read: 0.0.0.0. I
know that the cable modem works because once I connected the linksys
router back I was able to get on line just fine. Anyone of you guys out
there has some instructions on how to get this working. I read the
article on the isaserver site but that didn't help.
Thank you,
------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Other Internet Software Marketing Sites:
Leading Network Software Directory: http://www.serverfiles.com
No.1 Exchange Server Resource Site: http://www.msexchange.org Windows
Security Resource Site: http://www.windowsecurity.com/ Network Security
Library: http://www.secinf.net/ Windows 2000/NT Fax Solutions:
http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')
Other related posts:
