Hi All, We had to re-install a client's ISA over the weekend. We used their GHOSTed W2K Server install, plus a run of the ISA installer without message filtering in integrated mode and then used a Restore of the config. We then used Windows Update to bring the bits of W2K up-to-date. Now we get a weird problem from the published Exchange 5.5sp4 server which was not altered. It sits on 192.168.0.10, with an ISA Secure Mail Server rule accepting incoming SMTP on the external NIC to the Exchange machines IP. The usual rules are created, including SMTP/SMTPS outgoing. The Exchange machine is configured as SecureNAT (ie. gateway out is 192.168.0.1 - the ISA machine). Almost no email will go outbound. You can sit at the Exchange machine and type "telnet mail.domain.com 25" and get that domains SMTP server banner. The Exchange machine's event Log reports that the SMTP lookup works, and a session is openned. Sometime later (5mins?) there is a warning event, that the SMTP session timed out. DNS appears okay too. You can sit at the Exchange machine, type "nslookup mail.domain.com", and/or set the query type to MX and get a DNS answer no problems. I originally put ISA sp1 on, then disabled the SMTP filter as I was interested in whether or not this site would be effected by the sp1 bug. I've not rolled back sp1, AND tried removing/reinstalling ISA, but no improvement. Incoming mail is fine, and there are no client browsing problems. ISA doesn't appear to log any problem either. WTF? Regards, Connor! ----------------------------------------------------------- Connor Moran Projectset Australia Ph: +618 94791831 Pty Ltd cpm@xxxxxxxxxxxxxxxxx Computer Publishing Specialists -----------------------------------------------------------