Couldn't find any refernces to 14065 in KB or NET HELPMSG. What is the message you get along with this ID? Regards, Raj -----Original Message----- From: Uttam K. Malhotra [mailto:uttamm@xxxxxxxxxxxxxx] Sent: October 26, 2001 10:49 AM To: [ISAserver.org Discussion List] Subject: [isalist] RE: NLB in Internal NIC http://www.ISAserver.org Hi Raj Do u 've any idea of eventid no. 14065? Thx uttam -----Original Message----- From: Periyasamy, Raj [mailto:psraj@xxxxxxxxxxxx] Sent: Thursday, October 25, 2001 12:47 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: NLB in Internal NIC http://www.ISAserver.org I found the answer from an NLB Tech paper from MS. Following is the extract from that document. Network Load Balancing's unicast mode has the side effect of disabling communication between cluster hosts using the cluster adapters. Since outgoing packets for another cluster host are sent to the same MAC address as the sender, these packets are looped back within the sender by the network stack and never reach the wire. This limitation can be avoided by adding a second network adapter card to each cluster host. In this configuration, Network Load Balancing is bound to the network adapter on the subnet that receives incoming client requests, and the other adapter is typically placed on a separate, local subnet for communication between cluster hosts and with back-end file and database servers. Network Load Balancing only uses the cluster adapter for its heartbeat and remote control traffic. Regards, Raj -----Original Message----- From: Periyasamy, Raj [mailto:psraj@xxxxxxxxxxxx] Sent: Thursday, October 25, 2001 12:20 PM To: [ISAserver.org Discussion List] Subject: [isalist] NLB in Internal NIC http://www.ISAserver.org I am running NLB in the internal NIC for load balancing 2 ISA servers. The problem is if I open the network neighborhood in either of the ISA Server, I can see the other ISA server but cannot open the item to browse. I am able to browse all other server in the network without problem. And I am able to browse the two ISA servers from the other servers in the network. Any ideas, is this a behaviour of NLB function? Regards, Raj ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: psraj@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: uttamm@xxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: psraj@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')