[Ilugc] routing issues
- From: p_mdriyaz@xxxxxxxxxxx (Mohammed Riyaz)
- Date: Mon May 30 15:44:43 2005
Hi,
In machine 2, you have to do the IP MASQ for 192.168.0.x, use
IPTables.
Iptables is not the panacea for routing problems. Why cannot his
machine2 act as a simple router without packet mangling?
I was about to ask the same thing. I would like to add that routes for
machine 1 are added on to machine 3. (which is not shown in my previous
mail. i send wrong config for machine 3 by mistake). so i dont think
iptables masq would be necessary on machine 2.
To the OP: You probably -think- you have enabled IP forwarding, double
check that. What does "cat /proc/sys/net/ipv4/ip_forward" say on
machine2?
it is set to 1.
Thanks,
Mohammed Riyaz P.
--
http://www.fastmail.fm - Email service worth paying for. Try it for free
Other related posts:
