[Ilugc] networking mode selection
- From: girishvenkatachalam@xxxxxxxxx (Girish Venkatachalam)
- Date: Mon, 7 Feb 2011 13:29:08 +0530
On Mon, Feb 7, 2011 at 12:52 PM, Mr.Selva kumar <selvawithedu at gmail.com>
wrote:
but my doubt is:
to select which networking mode?
http://open.eucalyptus.com/wiki/Euca...iguration_v2.0<http://open.eucalyptus.com/wiki/EucalyptusNetworkConfiguration_v2.0>
as mentioned in the eucalyptus documention MANAGED and SYSTEM MODE is not
suitable for my college network. since we have to assign the ip address
manually(WITHOUT DHCP) and no VLAN available
so
1) managed NOVLAN or
2) STATIC MODE SUITABLE FOR OUR COLLEGE.
in our college ip ranges like 192.168.xx.xx or 10.1.xx.xx
so how to setup VNET related details.
VMs use several networking concepts that are hard even for
really advanced networking engineers.
Basiclally bridge mode will mean that you have to assign
IP addresses that are given in a physical machine. So your
VM would have magically become one more physical node
in your network.
This is best and most useful.
Other modes are NAT modes and called by various other
names in which you will not get full networking
functionality.
Also VLANs are another advanced concept that I am not
yet fully clear about. You can split a physical LAN into multiple
logical "segments" with this. There is a VLAN header in the MAC
layer that helps you do this.
I have no practical experience with it, so my knowledge is not
useful.
If you want to setup a cloud why don't you just use qemu?
-Girish
--
Gayatri Hitech
http://gayatri-hitech.com
girish at gayatri-hitech.com
Other related posts:
