[Ilugc] network card activation
- From: lists@xxxxxxxxxxx (Balaji Narayanan)
- Date: Sun Jun 18 00:55:45 2006
"Arul" == Arul <maran.arul@xxxxxxxxx> writes:
Arul> Shakthi, i run -> ifconfig eth1 192.168.0.1 after that ->
Arul> ifup eth1, it has failed same error"Determining IP
Arul> information for eth1 Failed".
When you run this, your card is already configured. Can you then try
ping 192.168.1.1 which as you said is your gateway and see if it is
working?
Are you using an ADSL router? If yes, can you look into its config if
it can be configured as a DHCP server?
-balaji
Arul> thanks, arul maran
Arul> On 6/17/06, Shakthi Kannan <cyborg4k@xxxxxxxxx> wrote:
>> Hi Arul,
>>
>> --- Arul <maran.arul@xxxxxxxxx> wrote:
>> > How can i configure DHCP or resolve this problem?
>>
>> Can you try to assign a static IP address for eth1 and see if
>> it get assigned? For example:
>>
>> ifconfig eth1 192.168.0.1
>>
>> SK
>>
>> -- Shakthi Kannan
http://www.shakthimaan.com
>>
>> __________________________________________________ Do You
>> Yahoo!? Tired of spam? Yahoo! Mail has the best spam
>> protection around
http://mail.yahoo.com
>> _______________________________________________ To unsubscribe,
>> email ilugc-request@xxxxxxxxxxxxx with "unsubscribe <password>
>> <address>" in the subject or body of the message.
>>
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc
>>
Arul> _______________________________________________ To
Arul> unsubscribe, email ilugc-request@xxxxxxxxxxxxx with
Arul> "unsubscribe <password> <address>" in the subject or body of
Arul> the message.
Arul>
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc
--
http://balajin.net/blog
BOFH excuse #112:
The monitor is plugged into the serial port
Other related posts:
