I have already used the same modem with mandrake 10 and slackware
for internet connection.
There is a problem with my internet connection in fedora core 2.
I have a windows XP and fedora core 2 dual boot PC.
I use a 56kbps dax external modem.
In windows XP it connect at 45333 bps.
But,in fedora core 2 it connects at 9600 bps.
I want to connect to internet using fedora core 2.
I found lots of messages regarding this issue in the internet.
I have given various log files information......
WHILE USING FEDORA CORE 2------>system-config-network and kppp
The /var/log/message content shows as:
Aug 26 22:16:36 localhost ifup-ppp: pppd started for Touchtel on
/dev/ttyS1 at 460800
Aug 26 22:16:36 localhost pppd[2303]: pppd 2.4.2 started by root,
uid 0
Aug 26 22:16:37 localhost wvdial[2318]: WvDial: Internet dialer
version 1.53
Aug 26 22:16:37 localhost wvdial[2318]: Initializing modem.
Aug 26 22:16:37 localhost wvdial[2318]: Sending: ATZ
Aug 26 22:16:37 localhost wvdial[2318]: ATZ
Aug 26 22:16:37 localhost wvdial[2318]: OK
Aug 26 22:16:37 localhost wvdial[2318]: Sending: ATQ0 V1 E1 S0=0
&C1 &D2 +FCLASS=0
Aug 26 22:16:37 localhost wvdial[2318]: ATQ0 V1 E1 S0=0 &C1 &D2
+FCLASS=0
Aug 26 22:16:37 localhost wvdial[2318]: OK
Aug 26 22:16:37 localhost wvdial[2318]: Sending: ATM1L4
Aug 26 22:16:37 localhost wvdial[2318]: ATM1L4
Aug 26 22:16:37 localhost wvdial[2318]: ERROR
- Ignored:
Aug 26 22:16:37 localhost wvdial[2318]: Bad init string.
Aug 26 22:16:37 localhost wvdial[2318]: stdin not read/write and
$MODEM not set
Aug 26 22:16:37 localhost pppd[2303]: Connect script failed
Aug 26 22:16:38 localhost pppd[2303]: Exit.
Aug 26 22:22:28 localhost pppd[2433]: pppd 2.4.2 started by root,
uid 0
Aug 26 22:22:28 localhost pppd[2433]: Using interface ppp0
Aug 26 22:22:28 localhost pppd[2433]: Connect: ppp0 <--> /dev/ttyS1
Aug 26 22:22:28 localhost kernel: PPP Deflate Compression module
registered
Aug 26 22:22:29 localhost pppd[2433]: local IP address
203.145.187.168
Aug 26 22:22:29 localhost pppd[2433]: remote IP address
203.145.160.2
Aug 26 22:22:29 localhost pppd[2433]: primary DNS address
203.145.184.13
Aug 26 22:22:29 localhost pppd[2433]: secondary DNS address
202.56.250.5
Aug 26 22:22:29 localhost pppd[2433]: Received bad
configure-nak/rej: 12 06 00 00 00 01
Aug 26 22:26:04 localhost pppd[2433]: Terminating on signal 15.
Aug 26 22:26:05 localhost pppd[2433]: Connection terminated.
Aug 26 22:26:05 localhost pppd[2433]: Connect time 3.6 minutes.
Aug 26 22:26:05 localhost pppd[2433]: Sent 112 bytes, received 404
bytes.
Aug 26 22:26:06 localhost pppd[2433]: Connect time 3.6 minutes.
Aug 26 22:26:06 localhost pppd[2433]: Sent 112 bytes, received 404
bytes.
Aug 26 22:26:06 localhost pppd[2433]: Exit.
WHILE USING WINDOWS XP[modem log file]
08-27-2004 00:54:24.731 - Modem type: 56K Smart SCM Modem(EXTERNAL)
08-27-2004 00:54:24.731 - Modem inf path: oem0.inf
08-27-2004 00:54:24.731 - Modem inf section: Install
08-27-2004 00:54:24.731 - Matching hardware ID: serenum\rss0303
08-27-2004 00:54:24.731 - 115200,8,N,1, ctsfl=1, rtsctl=2
08-27-2004 00:54:24.731 - Initializing modem.
08-27-2004 00:54:24.741 - Send: AT<cr>
08-27-2004 00:54:24.741 - Recv: AT<cr>
08-27-2004 00:54:24.741 - Command Echo
08-27-2004 00:54:24.741 - Recv: <cr><lf>OK<cr><lf>
08-27-2004 00:54:24.741 - Interpreted response: OK
08-27-2004 00:54:24.751 - Send:
AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1<cr>
08-27-2004 00:54:24.751 - Recv:
AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1<cr>
08-27-2004 00:54:24.751 - Command Echo
08-27-2004 00:54:24.761 - Recv: <cr><lf>OK<cr><lf>
08-27-2004 00:54:24.761 - Interpreted response: OK
08-27-2004 00:54:24.771 - Send:
ATS7=60S30=0L1M1+ES=3,0,2;+DS=3;+IFC=2,2;BX4<cr>
08-27-2004 00:54:24.771 - Recv: <cr><lf>OK<cr><lf>
08-27-2004 00:54:24.771 - Interpreted response: OK
08-27-2004 00:54:24.771 - Waiting for a call.
08-27-2004 00:54:24.781 - Send: at+vcid=1<cr>
08-27-2004 00:54:24.781 - Recv: <cr><lf>OK<cr><lf>
08-27-2004 00:54:24.781 - Interpreted response: OK
08-27-2004 00:54:24.791 - Send: ATS0=0<cr>
08-27-2004 00:54:24.801 - Recv: <cr><lf>OK<cr><lf>
08-27-2004 00:54:24.801 - Interpreted response: OK
08-27-2004 00:54:24.901 - 921600,8,N,1, ctsfl=1, rtsctl=2
08-27-2004 00:54:24.901 - Initializing modem.
08-27-2004 00:54:24.911 - Send: AT<cr>
08-27-2004 00:54:24.911 - Recv: <cr><lf>OK<cr><lf>
08-27-2004 00:54:24.911 - Interpreted response: OK
08-27-2004 00:54:24.921 - Send:
AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1<cr>
08-27-2004 00:54:24.941 - Recv: <cr><lf>OK<cr><lf>
08-27-2004 00:54:24.941 - Interpreted response: OK
08-27-2004 00:54:24.951 - Send:
ATS7=60S30=0L1M0+ES=3,0,2;+DS=3;+IFC=2,2;BX4<cr>
08-27-2004 00:54:24.951 - Recv: <cr><lf>OK<cr><lf>
08-27-2004 00:54:24.951 - Interpreted response: OK
08-27-2004 00:54:24.951 - Dialing.
08-27-2004 00:54:24.961 - Send: ATDT####<cr>
08-27-2004 00:54:48.655 - Recv: <cr><lf>+MCR: V90<cr><lf>
08-27-2004 00:54:48.655 - Interpreted response: Informative
08-27-2004 00:54:48.655 - Recv: <cr><lf>+MRR: 45333<cr><lf>
08-27-2004 00:54:48.655 - Interpreted response: Informative
08-27-2004 00:54:48.985 - Recv: <cr><lf>+ER: LAPM<cr><lf>
08-27-2004 00:54:48.985 - Interpreted response: Informative
08-27-2004 00:54:48.985 - Recv: <cr><lf>+DR: V42B<cr><lf>
08-27-2004 00:54:48.985 - Interpreted response: Informative
08-27-2004 00:54:48.985 - Recv: <cr><lf>CONNECT 115200<cr><lf>
08-27-2004 00:54:48.985 - Interpreted response: Connect
08-27-2004 00:54:48.985 - Connection established at 45333bps.
08-27-2004 00:54:48.985 - Error-control on.
08-27-2004 00:54:48.985 - Data compression on.
Steps taken by me:
step 1:[upgrading kernel]
This problem persists in both kernels-2.6.5-1.358 and 2.6.6-1.427.
I have sent the /var/log/message in fedora core 2.
step 2:[change modem init strings in kppp and wvdial]
While searching i found that replacing correct modem init scripts
rectifies the problem.
I found the respective inf file in windows xp and copied the init
strings.
These are the modem init strings in my windows *.inf file.I
replaced the modem init string in /etc/wvdial.conf and ran wvdial as root.
HKR, Init, 1,, "AT<cr>"
HKR, Init, 2,, "AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1<cr>"
Even after changing the init strings the system connects at 9600
bps.
Console output is:
[root@localhost ignacius]# wvdial Touchtel
--> WvDial: Internet dialer version 1.53
--> Initializing modem.
--> Sending: AT
OK
--> Sending: AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1
OK
--> Modem initialized.
--> Sending: ATDT1500
--> Waiting for carrier.
+MCR: V90
+MRR: 45333
+ER: LAPM
+DR: V42B I have already used the same modem with mandrake 10 and slackware
for internet connection.
There is a problem with my internet connection in fedora core 2.
I have a windows XP and fedora core 2 dual boot PC.
I use a 56kbps dax external modem.
In windows XP it connect at 45333 bps.
But,in fedora core 2 it connects at 9600 bps.
I want to connect to internet using fedora core 2.
I found lots of messages regarding this issue in the internet.
I have given various log files information......
WHILE USING FEDORA CORE 2------>system-config-network and kppp
The /var/log/message content shows as:
Aug 26 22:16:36 localhost ifup-ppp: pppd started for Touchtel on
/dev/ttyS1 at 460800
Aug 26 22:16:36 localhost pppd[2303]: pppd 2.4.2 started by root,
uid 0
Aug 26 22:16:37 localhost wvdial[2318]: WvDial: Internet dialer
version 1.53
Aug 26 22:16:37 localhost wvdial[2318]: Initializing modem.
Aug 26 22:16:37 localhost wvdial[2318]: Sending: ATZ
Aug 26 22:16:37 localhost wvdial[2318]: ATZ
Aug 26 22:16:37 localhost wvdial[2318]: OK
Aug 26 22:16:37 localhost wvdial[2318]: Sending: ATQ0 V1 E1 S0=0
&C1 &D2 +FCLASS=0
Aug 26 22:16:37 localhost wvdial[2318]: ATQ0 V1 E1 S0=0 &C1 &D2
+FCLASS=0
Aug 26 22:16:37 localhost wvdial[2318]: OK
Aug 26 22:16:37 localhost wvdial[2318]: Sending: ATM1L4
Aug 26 22:16:37 localhost wvdial[2318]: ATM1L4
Aug 26 22:16:37 localhost wvdial[2318]: ERROR
- Ignored:
Aug 26 22:16:37 localhost wvdial[2318]: Bad init string.
Aug 26 22:16:37 localhost wvdial[2318]: stdin not read/write and
$MODEM not set
Aug 26 22:16:37 localhost pppd[2303]: Connect script failed
Aug 26 22:16:38 localhost pppd[2303]: Exit.
Aug 26 22:22:28 localhost pppd[2433]: pppd 2.4.2 started by root,
uid 0
Aug 26 22:22:28 localhost pppd[2433]: Using interface ppp0
Aug 26 22:22:28 localhost pppd[2433]: Connect: ppp0 <--> /dev/ttyS1
Aug 26 22:22:28 localhost kernel: PPP Deflate Compression module
registered
Aug 26 22:22:29 localhost pppd[2433]: local IP address
203.145.187.168
Aug 26 22:22:29 localhost pppd[2433]: remote IP address
203.145.160.2
Aug 26 22:22:29 localhost pppd[2433]: primary DNS address
203.145.184.13
Aug 26 22:22:29 localhost pppd[2433]: secondary DNS address
202.56.250.5
Aug 26 22:22:29 localhost pppd[2433]: Received bad
configure-nak/rej: 12 06 00 00 00 01
Aug 26 22:26:04 localhost pppd[2433]: Terminating on signal 15.
Aug 26 22:26:05 localhost pppd[2433]: Connection terminated.
Aug 26 22:26:05 localhost pppd[2433]: Connect time 3.6 minutes.
Aug 26 22:26:05 localhost pppd[2433]: Sent 112 bytes, received 404
bytes.
Aug 26 22:26:06 localhost pppd[2433]: Connect time 3.6 minutes.
Aug 26 22:26:06 localhost pppd[2433]: Sent 112 bytes, received 404
bytes.
Aug 26 22:26:06 localhost pppd[2433]: Exit.
WHILE USING WINDOWS XP[modem log file]
08-27-2004 00:54:24.731 - Modem type: 56K Smart SCM Modem(EXTERNAL)
08-27-2004 00:54:24.731 - Modem inf path: oem0.inf
08-27-2004 00:54:24.731 - Modem inf section: Install
08-27-2004 00:54:24.731 - Matching hardware ID: serenum\rss0303
08-27-2004 00:54:24.731 - 115200,8,N,1, ctsfl=1, rtsctl=2
08-27-2004 00:54:24.731 - Initializing modem.
08-27-2004 00:54:24.741 - Send: AT<cr>
08-27-2004 00:54:24.741 - Recv: AT<cr>
08-27-2004 00:54:24.741 - Command Echo
08-27-2004 00:54:24.741 - Recv: <cr><lf>OK<cr><lf>
08-27-2004 00:54:24.741 - Interpreted response: OK
08-27-2004 00:54:24.751 - Send:
AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1<cr>
08-27-2004 00:54:24.751 - Recv:
AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1<cr>
08-27-2004 00:54:24.751 - Command Echo
08-27-2004 00:54:24.761 - Recv: <cr><lf>OK<cr><lf>
08-27-2004 00:54:24.761 - Interpreted response: OK
08-27-2004 00:54:24.771 - Send:
ATS7=60S30=0L1M1+ES=3,0,2;+DS=3;+IFC=2,2;BX4<cr>
08-27-2004 00:54:24.771 - Recv: <cr><lf>OK<cr><lf>
08-27-2004 00:54:24.771 - Interpreted response: OK
08-27-2004 00:54:24.771 - Waiting for a call.
08-27-2004 00:54:24.781 - Send: at+vcid=1<cr>
08-27-2004 00:54:24.781 - Recv: <cr><lf>OK<cr><lf>
08-27-2004 00:54:24.781 - Interpreted response: OK
08-27-2004 00:54:24.791 - Send: ATS0=0<cr>
08-27-2004 00:54:24.801 - Recv: <cr><lf>OK<cr><lf>
08-27-2004 00:54:24.801 - Interpreted response: OK
08-27-2004 00:54:24.901 - 921600,8,N,1, ctsfl=1, rtsctl=2
08-27-2004 00:54:24.901 - Initializing modem.
08-27-2004 00:54:24.911 - Send: AT<cr>
08-27-2004 00:54:24.911 - Recv: <cr><lf>OK<cr><lf>
08-27-2004 00:54:24.911 - Interpreted response: OK
08-27-2004 00:54:24.921 - Send:
AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1<cr>
08-27-2004 00:54:24.941 - Recv: <cr><lf>OK<cr><lf>
08-27-2004 00:54:24.941 - Interpreted response: OK
08-27-2004 00:54:24.951 - Send:
ATS7=60S30=0L1M0+ES=3,0,2;+DS=3;+IFC=2,2;BX4<cr>
08-27-2004 00:54:24.951 - Recv: <cr><lf>OK<cr><lf>
08-27-2004 00:54:24.951 - Interpreted response: OK
08-27-2004 00:54:24.951 - Dialing.
08-27-2004 00:54:24.961 - Send: ATDT####<cr>
08-27-2004 00:54:48.655 - Recv: <cr><lf>+MCR: V90<cr><lf>
08-27-2004 00:54:48.655 - Interpreted response: Informative
08-27-2004 00:54:48.655 - Recv: <cr><lf>+MRR: 45333<cr><lf>
08-27-2004 00:54:48.655 - Interpreted response: Informative
08-27-2004 00:54:48.985 - Recv: <cr><lf>+ER: LAPM<cr><lf>
08-27-2004 00:54:48.985 - Interpreted response: Informative
08-27-2004 00:54:48.985 - Recv: <cr><lf>+DR: V42B<cr><lf>
08-27-2004 00:54:48.985 - Interpreted response: Informative
08-27-2004 00:54:48.985 - Recv: <cr><lf>CONNECT 115200<cr><lf>
08-27-2004 00:54:48.985 - Interpreted response: Connect
08-27-2004 00:54:48.985 - Connection established at 45333bps.
08-27-2004 00:54:48.985 - Error-control on.
08-27-2004 00:54:48.985 - Data compression on.
Steps taken by me:
step 1:[upgrading kernel]
This problem persists in both kernels-2.6.5-1.358 and 2.6.6-1.427.
I have sent the /var/log/message in fedora core 2.
step 2:[change modem init strings in kppp and wvdial]
While searching i found that replacing correct modem init scripts
rectifies the problem.
I found the respective inf file in windows xp and copied the init
strings.
These are the modem init strings in my windows *.inf file.I
replaced the modem init string in /etc/wvdial.conf and ran wvdial as root.
HKR, Init, 1,, "AT<cr>"
HKR, Init, 2,, "AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1<cr>"
Even after changing the init strings the system connects at 9600
bps.
Console output is:
[root@localhost ignacius]# wvdial Touchtel
--> WvDial: Internet dialer version 1.53
--> Initializing modem.
--> Sending: AT
OK
--> Sending: AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1
OK
--> Modem initialized.
--> Sending: ATDT1500
--> Waiting for carrier.
+MCR: V90
+MRR: 45333
+ER: LAPM
+DR: V42B
CONNECT 9600
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Fri Aug 27 13:12:35 2004
--> pid of pppd: 2496
AFTER I PRESSED CTRL-C
Caught signal #2! Attempting to exit gracefully...
--> Disconnecting at Fri Aug 27 13:13:08 2004
please help me in this regard.
I need immediate help.
Thank you all in advance.
Ignacius
CONNECT 9600
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Fri Aug 27 13:12:35 2004
--> pid of pppd: 2496
AFTER I PRESSED CTRL-C
Caught signal #2! Attempting to exit gracefully...
--> Disconnecting at Fri Aug 27 13:13:08 2004
please help me in this regard.
I need immediate help.
Thank you all in advance.
Ignacius
---------------------------------
Do you Yahoo!?
Win 1 of 4,000 free domain names from Yahoo! Enter now.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://www.ae.iitm.ac.in/pipermail/ilugc/attachments/20040827/f1433cc2/attachment-0001.htm
