[Ilugc] Slave Hard disk detection
- From: shuveb@xxxxxxxxx (Shuveb Hussain)
- Date: Fri May 20 23:41:20 2005
Hi,
Can anyone tell me how i can detect a slave hard disk on Redhat 8.0
The Master disk alone gets detected.
Try out the command:
$ dmesg | grep hdb
and see if there is any output. If you have SCSI, replace hdb by sdb.
If there is output from this command, then it is likely that your hard
disk got detected. But are you aware that you need to mount your hard
disk partitions before you can use them?
--shuveb
Other related posts:
