[Ilugc] NIC information
- From: sbharathi@xxxxxxxxxxxxx (sbharathi@xxxxxxxxxxxxx)
- Date: Tue Jul 27 10:00:33 2004
On Tue, 27 Jul 2004, durai wrote:
If I have 2 network cards connected, how can I know
which is belonging to eth0 and eth1? .
/etc/modules.conf will tell you which module(driver)
corresponds to which interface.
if both NIC are same make then using MAC Addr only you can
differentiate. But it is possible to associate eth0 to one
mac addr using "nameif" command.
Read man nameif
Other related posts: