I added the lines
echo "alias net-pf-10 off" >> /etc/modprobe.conf
echo "alias ipv6 off" >> /etc/modprobe.conf
Opened Gedit as root and browse to /etc/modprobe.conf
added these two lines:
alias net-pf-10 ipv4
install ipv4 /bin/true
Saved and rebooted.
/etc/wvdial.conf file
[Modem0]
Modem = /dev/ttyS1
Baud = 460800
SetVolume = 4
Dial Command = ATDT
Init1 = ATZ
FlowControl = CRTSCTS
[Dialer Touchtel]
Username = xxxx
Password = xxxx
Phone = 1500
Stupid Mode = 1
Init1 = ATZ
Init2 = AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1
Init3 = ATS7=60S30=0L1M1+ES=3,0,2;+DS=3;+IFC=2,2;BX4
Inherits = Modem0
I connect using gnome menu------------------>system tools------------->network
device control
Aug 28 09:10:08 localhost ifup-ppp: pppd started for Touchtel on /dev/ttyS1 at
460800
Aug 28 09:10:09 localhost kernel: CSLIP: code copyright 1989 Regents of the
University of California
Aug 28 09:10:09 localhost kernel: PPP generic driver version 2.4.2
Aug 28 09:10:09 localhost pppd[2413]: pppd 2.4.2 started by root, uid 0
Aug 28 09:10:10 localhost wvdial[2433]: WvDial: Internet dialer version 1.53
Aug 28 09:10:10 localhost wvdial[2433]: Initializing modem.
Aug 28 09:10:11 localhost wvdial[2433]: Sending: ATZ
Aug 28 09:10:11 localhost wvdial[2433]: ATZ
Aug 28 09:10:11 localhost wvdial[2433]: OK
Aug 28 09:10:11 localhost wvdial[2433]: Sending:
AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1
Aug 28 09:10:11 localhost wvdial[2433]: AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1
Aug 28 09:10:11 localhost wvdial[2433]: OK
Aug 28 09:10:11 localhost wvdial[2433]: Sending:
ATS7=60S30=0L1M1+ES=3,0,2;+DS=3;+IFC=2,2;BX4
Aug 28 09:10:11 localhost wvdial[2433]: OK
Aug 28 09:10:11 localhost wvdial[2433]: Modem initialized.
Aug 28 09:10:11 localhost wvdial[2433]: Sending: ATDT1500
Aug 28 09:10:11 localhost wvdial[2433]: Waiting for carrier.
Aug 28 09:10:37 localhost wvdial[2433]: +MCR: V90
Aug 28 09:10:37 localhost wvdial[2433]: +MRR: 45333
Aug 28 09:10:38 localhost wvdial[2433]: +ER: LAPM
Aug 28 09:10:38 localhost wvdial[2433]: +DR: V42B
Aug 28 09:10:38 localhost wvdial[2433]: CONNECT 9600
Aug 28 09:10:38 localhost wvdial[2433]: Carrier detected. Chatmode finished.
Aug 28 09:10:38 localhost pppd[2413]: Serial connection established.
Aug 28 09:10:38 localhost pppd[2413]: Using interface ppp0
Aug 28 09:10:38 localhost pppd[2413]: Connect: ppp0 <--> /dev/ttyS1
Aug 28 09:10:40 localhost kernel: PPP Deflate Compression module registered
Aug 28 09:10:40 localhost pppd[2413]: local IP address 203.145.160.182
Aug 28 09:10:40 localhost pppd[2413]: remote IP address 203.145.160.2
Aug 28 09:10:40 localhost pppd[2413]: primary DNS address 203.145.184.13
Aug 28 09:10:40 localhost pppd[2413]: secondary DNS address 202.56.250.5
Aug 28 09:10:41 localhost pppd[2413]: Received bad configure-nak/rej: 12 06 00
00 00 01
Aug 28 09:10:43 localhost su(pam_unix)[2489]: session opened for user root by
(uid=0)
Aug 28 09:10:43 localhost su(pam_unix)[2489]: session closed for user root
Aug 28 09:14:25 localhost pppd[2413]: Terminating on signal 15.
Aug 28 09:14:26 localhost su(pam_unix)[2539]: session opened for user root by
(uid=0)
Aug 28 09:14:26 localhost su(pam_unix)[2539]: session closed for user root
Aug 28 09:14:28 localhost pppd[2413]: Hangup (SIGHUP)
Aug 28 09:14:28 localhost pppd[2413]: Modem hangup
Aug 28 09:14:28 localhost pppd[2413]: Connection terminated.
Aug 28 09:14:28 localhost pppd[2413]: Connect time 3.8 minutes.
Aug 28 09:14:28 localhost pppd[2413]: Sent 56526 bytes, received 156376 bytes.
Aug 28 09:14:29 localhost pppd[2413]: Connect time 3.8 minutes.
Aug 28 09:14:29 localhost pppd[2413]: Sent 56526 bytes, received 156376 bytes.
Aug 28 09:14:29 localhost pppd[2413]: Exit.
Aug 28 09:14:48 localhost gconfd (root-2392): GConf server is not in use,
shutting down.
Aug 28 09:14:48 localhost gconfd (root-2392): Exiting
These outputs may help you...
[root@localhost ignacius]# ping www.google.com -c 3
PING www.google.akadns.net (64.233.167.104) 56(84) bytes of data.
--- www.google.akadns.net ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 2013ms
[root@localhost ignacius]# /sbin/ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2370 errors:0 dropped:0 overruns:0 frame:0
TX packets:2370 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1676770 (1.5 Mb) TX bytes:1676770 (1.5 Mb)
ppp0 Link encap:Point-to-Point Protocol
inet addr:203.145.160.182 P-t-P:203.145.160.2 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:127 errors:1 dropped:0 overruns:0 frame:0
TX packets:141 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:50438 (49.2 Kb) TX bytes:17466 (17.0 Kb)
I have doubts whether is this the maximum net speed possible in fedora?It is
still somewhat slightly slower when compared to XP...
If any of you have detailed idea,Please give me what are the configuration
files used by kppp.
What are the changes I have to make based on the above given details[The
details given are for GNOME menu-->Network device control].
Any body using redhat 9 or fedora core1 and dax 56k external modem--->
please send your /etc/wvdial.conf file and /etc/modprobe.conf and other
configuration files and kppp values in a detailed manner.It will be of great
help to me.
-----------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://www.ae.iitm.ac.in/pipermail/ilugc/attachments/20040828/661d8f43/attachment.htm
