[PCB_FORUM] Re: pcb-si vias
- From: <sjcharles@xxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Mon, 28 Feb 2005 12:48:11 -0500
we have a routed board and selected the trace. The trace has two vias. but when
we simulate the vias are NOT there. How or do we define the vias as being a
part of the signal?
> Thanks
>
> From: <sjcharles@xxxxxxx>
> Date: 2005/02/28 Mon PM 12:44:13 EST
> To: <icu-pcb-forum@xxxxxxxxxxxxx>
> Subject: [PCB_FORUM] Re: pcb-si vias
>
> we have a routed board and selected the trace. The trace has two vias. but
> when we simulate the vias are there. How or do we define the vias as being a
> part of the signal?
> Thanks
> >
> > From: "David Greig" <david@xxxxxxxxxxxxxx>
> > Date: 2005/02/28 Mon AM 10:52:30 EST
> > To: <icu-pcb-forum@xxxxxxxxxxxxx>
> > Subject: [PCB_FORUM] Re: pcb-si vias
> >
> > SI 630 uses a 3D field solver - a built in solution from Optimal. Via's and
> > ground plane holes are modelled (unlike many other packages)
> >
> >
> > Best Regards
> >
> > David Greig
> > ______________________________
> > GigaDyne Ltd
> > Buchan House
> > Carnegie Campus
> > Dunfermline KY11 8PL
> > United Kingdom
> > t: +44 (0)1383 624 975
> > ______________________________
> >
> > -----Original Message-----
> > From: sjcharles@xxxxxxx [mailto:sjcharles@xxxxxxx]
> > Sent: 28 February 2005 15:33
> > To: icu-pcb-forum@xxxxxxxxxxxxx; icu-pcb-forum@xxxxxxxxxxxxx
> > Subject: [PCB_FORUM] Re: pcb-si vias
> >
> > Does the si tool simulate vias? We're using 15.2 thanks
> > >
> > > From: "Kevin Buchanan" <buck@xxxxxxx>
> > > Date: 2005/02/24 Thu PM 04:00:12 EST
> > > To: <icu-pcb-forum@xxxxxxxxxxxxx>
> > > Subject: [PCB_FORUM] Re: pcb-si
> > >
> > > Sam,
> > >
> > > PCB-SI is the renamed SpecctraQuest Signal Integrity (SI) Analysis
> > > product.
> > > The front end works very similar to allegro. It is used for floor
> > > planning, initial stack up analysis and Signal integrity.
> > >
> > > The SI portions of the tool has a very large learning curve. I hope
> > > you have time to learn modeling and simulation.
> > >
> > > Buck...
> > >
> > > -----Original Message-----
> > > From: sjcharles@xxxxxxx [mailto:sjcharles@xxxxxxx]
> > > Sent: Thursday, February 24, 2005 3:42 PM
> > > To: icu-pcb-forum@xxxxxxxxxxxxx
> > > Subject: [PCB_FORUM] pcb-si
> > >
> > >
> > > we have this pcb-si, but no one to drive it. Is it necessary to have
> > > concept HDL to run pcb-si? Also where is a good place to start
> > > learning this
> > >
> > > Thanks in advance
> > > Sam
> > >
> > > -----------------------------------------------------------
> > > To subscribe/unsubscribe:
> > > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > > with a subject of subscribe or unsubscribe
> > >
> > > To view the archives of this list please login at
> > //www.freelists.org.
> > > Our list name is icu-pcb-forum or go to
> > > //www.freelists.org/archives/icu-pcb-forum/
> > >
> > > Problems or Questions:
> > > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > >
> > > Want to post a job listing ? DON'T DO IT HERE!
> > > Better yet, join our jobs listing forum.
> > >
> > > SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
> > > POST: icu-jobs-forum@xxxxxxxxxx
> > > -----------------------------------------------------------
> > >
> > > -----------------------------------------------------------
> > > To subscribe/unsubscribe:
> > > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > > with a subject of subscribe or unsubscribe
> > >
> > > To view the archives of this list please login at
> > > //www.freelists.org. Our list name is icu-pcb-forum or go to
> > > //www.freelists.org/archives/icu-pcb-forum/
> > >
> > > Problems or Questions:
> > > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > >
> > > Want to post a job listing ? DON'T DO IT HERE!
> > > Better yet, join our jobs listing forum.
> > >
> > > SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
> > > POST: icu-jobs-forum@xxxxxxxxxx
> > > -----------------------------------------------------------
> > >
> >
> > -----------------------------------------------------------
> > To subscribe/unsubscribe:
> > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > with a subject of subscribe or unsubscribe
> >
> > To view the archives of this list please login at //www.freelists.org.
> > Our list name is icu-pcb-forum or go to
> > //www.freelists.org/archives/icu-pcb-forum/
> >
> > Problems or Questions:
> > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> >
> > Want to post a job listing ? DON'T DO IT HERE!
> > Better yet, join our jobs listing forum.
> >
> > SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
> > POST: icu-jobs-forum@xxxxxxxxxx
> > -----------------------------------------------------------
> > --
> > Virus scanned by Lumison.
> >
> >
> > -----------------------------------------------------------
> > To subscribe/unsubscribe:
> > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > with a subject of subscribe or unsubscribe
> >
> > To view the archives of this list please login at
> > //www.freelists.org. Our list name is icu-pcb-forum
> > or go to //www.freelists.org/archives/icu-pcb-forum/
> >
> > Problems or Questions:
> > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> >
> > Want to post a job listing ? DON'T DO IT HERE!
> > Better yet, join our jobs listing forum.
> >
> > SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
> > POST: icu-jobs-forum@xxxxxxxxxx
> > -----------------------------------------------------------
> >
>
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list please login at
> //www.freelists.org. Our list name is icu-pcb-forum
> or go to //www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>
> Want to post a job listing ? DON'T DO IT HERE!
> Better yet, join our jobs listing forum.
>
> SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
> POST: icu-jobs-forum@xxxxxxxxxx
> -----------------------------------------------------------
>
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
Other related posts:
