Try turning off Bubble and Smooth. This seems to work for me when I'm working with small miters. -----Original Message----- From: westfeldt [mailto:westfeldt_nbcd@xxxxxxxxx] Sent: Sunday, December 26, 2004 11:41 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: miter minimum Thank you Gerry. But when I set it this small it automatically pops adjoining miters on the trace to this small size. Is there a way to avoid this side effect. I guess I could make a little script and alias that sets 5 or 10 mils for when I'm just messing around with the small miters. Patrick Westfeldt, Jr. North Boulder Circuit Design westfeldt_nbcd@xxxxxxxxx 720-406-0887 c 720-272-5822 _____ From: Gerry Meier [mailto:gerry.meier@xxxxxxxxxxxxxx] Sent: Sunday, December 26, 2004 9:20 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: miter minimum max 45 len - set it to whatever you what the max corner to be 5 mil 10 mils Gerry Meier Sr. PCB Designer Freedom CAD Services, Inc. Voice: (603) 864-1300 x1350 Alt. Voice: (386) 753-0048 Email: gerry.meier@xxxxxxxxxxxxxx visit our website at<http://www.freedomcad.com <http://www.freedomcad.com/> _____ From: westfeldt [mailto:westfeldt_nbcd@xxxxxxxxx] Sent: Sunday, December 26, 2004 9:34 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] miter minimum In slide trace command, v15.1, what is the setting that keeps me from making the miter on a corner smaller? When I try to get the miter length small, it blows up and eliminates the miter altogether. Patrick Westfeldt, Jr. North Boulder Circuit Design westfeldt_nbcd@xxxxxxxxx 720-406-0887 c 720-272-5822