[PCB_FORUM] design reuse question
- From: Rock Shi <rshi@xxxxxxxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Wed, 24 Aug 2005 17:44:34 -0400 (EDT)
Hi,
I have met a problem in placing modules in my board design. In my
schematic, I have six blocks, and I have assigned "SUBDESIGN_SUFFIX"
properties as below:
block name subdesign_suffix
A 1
B 2
B 3
C 4
D 5
D 6
I believe I followed design reuse procedures very carefully. However,
when I opened the exported board and tried to do the placement, I only see
modules
A_1
B_2
B_3
C_4
D_5
D_6 is always missing.
I am running SPB 15.2 in UNIX. Any help and clue would be highly
appreciated. Thanks very much in advance.
Best regards,
Rock
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
Other related posts:
- » [PCB_FORUM] design reuse question