Hello Barbara I had a suspicion you would reply! In the pcbenv ilinit file, works a treat. I remember there was somewhere a long list of such variables. Is one still around? Many thanks. Richard >>> Barbara Seeger <blm@xxxxxxxxxxx> 12/12/2007 3:04 a.m. >>> Hi, The syntax you want in a script for the variable is: set noconfirm_uprev 1 This should work for both questions. Regards, Barbara Seeger - Cadence On Tue, 2007-12-11 at 06:56, William Gerner - Sun Microsystems wrote: > Hi Richard, > > I was working the same issue over the past couple of days. One of the > following > may work for you: > > - set noconfirm_uprev = true (seems to work well if in your env file though > I've had > problems when I try to > put it in an > Allegro script) > > - You can also set this as environment variable within a program (i.e. perl), > though > finding the correct syntax can be fun. > > Note that I've asked Cadence to look into why "set noconfirm_uprev = true" > works > when I execute it within an Allegro session but not when I run it from a > script in > no-graphics mode. > > Regards, > > -Bill > > richard moffat wrote: > > Hello all > > > > I'm trying to open pre-v16 Allegro files in no-graphics mode using v16. > > > > Unfortunately, the "Warning - This database was saved by an earlier > > release..." pops up. > > > > Can this be disabled for the no-graphics mode? Otherwise, it just hangs. > > > > Cheers, > > Richard > > > > > > __________________________ > > Richard Moffat > > PCB CAD Team Leader > > Allied Telesis Labs > > ph. +64 (3) 3393000 > > richard.moffat@xxxxxxxxxxxxxxxxxxx > > > > NOTICE: This message contains privileged and confidential > > information intended only for the use of the addressee > > named above. If you are not the intended recipient of > > this message you are hereby notified that you must not > > disseminate, copy or take any action in reliance on it. > > If you have received this message in error please > > notify Allied Telesis Labs Ltd immediately. > > Any views expressed in this message are those of the > > individual sender, except where the sender has the > > authority to issue and specifically states them to > > be the views of Allied Telesis Labs. > > ----------------------------------------------------------- > > To subscribe/unsubscribe: > > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx > > with a subject of subscribe or unsubscribe > > > > To view the archives of this list go to > > //www.freelists.org/archives/icu-pcb-forum/ > > > > Problems or Questions: > > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx > > ----------------------------------------------------------- > ----------------------------------------------------------- > To subscribe/unsubscribe: > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx > with a subject of subscribe or unsubscribe > > To view the archives of this list go to > //www.freelists.org/archives/icu-pcb-forum/ > > Problems or Questions: > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx > ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx ----------------------------------------------------------- NOTICE: This message contains privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that you must not disseminate, copy or take any action in reliance on it. If you have received this message in error please notify Allied Telesis Labs Ltd immediately. Any views expressed in this message are those of the individual sender, except where the sender has the authority to issue and specifically states them to be the views of Allied Telesis Labs. ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------