Thanks... looks like the same file but I'll give it a try. -Darryl ________________________________ From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Gerry Meier Sent: Wednesday, January 30, 2008 10:16 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Specctra props on etch/vias Try this one Gerry Meier, Sr. PCB Designer Freedom CAD Services. Inc Voice: (256)776-7470 or (603) 864-1350 Email:gerry.meier@xxxxxxxxxxxxxx visit us at http://www.freedomcad.com ________________________________ From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Darryl Black (dlblack) Sent: Wednesday, January 30, 2008 9:11 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Specctra props on etch/vias I think someone may have posted on this recently but I can't seem to find the archives (do they still archive these emails?) so here it is again. Our breakouts are getting tagged as part of the symbols after importing from Specctra. Our version of "del_cline_props.il" from 13.6 doesn't seem to be working. Was there a change since 13.6 that requires an update to this skill code? Has anyone seen this lately? Darryl Black CAD Applications Eng Kanata Development Center dlblack@xxxxxxxxx <mailto:dlblack@xxxxxxxxx> Phone :613 254 3793 Cisco Systems, Inc. 2000 Innovation Dr. Kanata, Ontario Canada K2K 3E8 www.cisco.com <http://www.cisco.com/> This e-mail may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply e-mail and delete all copies of this message.