[PCB_FORUM] Re: Purge Via List
- From: "Peter Hughes" <phughes@xxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Mon, 6 Feb 2006 13:42:42 -0000
Hi Chandra,
Looks like you are using Studio. One other way to delete unconnected
vias is.
Edit -> Properties
Go to the Find Tab and in the Find By Name section Click More
Choose Net as Object type
Click All
Click OK
In the Available Properties Click on Fixed.
Click Apply.
You have now fixed all nets and their attached components.
Now you can do a delete of vias over the whole board and any via that is
not connected to a net will be deleted.
Once you have deleted the vias, unfix the nets by following the same
steps as above.
Rgrds
Peter Hughes,
PCB Designer,
Concurrent Technologies,
4 Gilberd Close,
Newcomen Way,
Colchester,
Essex,
CO4 4WN.
Tel: +44 1206 752626
Fax: +44 1206 751116
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Chandra Kanth
Sent: 06 February 2006 13:17
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Purge Via List
I dont have any option such as parameters in 15.1
Regards,
Chandra Kanth
----- Original Message -----
From: Peter Hughes <mailto:phughes@xxxxxxxxx>
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Monday, February 06, 2006 18:37
Subject: [PCB_FORUM] Re: Purge Via List
Hi Chandra,
Follow these commands to delete unused vias.
Route -> Gloss -> Parameters
Uncheck all boxes except Via eliminate
Click on the box next to Via eliminate
Uncheck all boxes except Eliminate Stand Alone Vias
Click OK
Click Gloss
Rgrds
Peter Hughes,
PCB Designer,
Concurrent Technologies,
4 Gilberd Close,
Newcomen Way,
Colchester,
Essex,
CO4 4WN.
Tel: +44 1206 752626
Fax: +44 1206 751116
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Chandra Kanth
Sent: 06 February 2006 12:49
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Purge Via List
HI all,
I am using 15.1 and 15.2 allegro.
I have a previously ddesigned board.Now I want to reroute that board.So
I have deleted all the traces in the internal layers.I want top and
Bottom to be rermained as same.
After deleting all the traces now I want to purge all the unused
vias.How can I do it?
Can u please help me?
Regards
Chandra Kanth
Other related posts:
