Hi, Here is an example of the allegro.ilinit we use. load("C:/SS2/r7b/lib/skill/Auto_Balancing.il") load("C:/SS2/r7b/lib/skill/admdata.il") load("C:/SS2/r7b/lib/skill/Center_Number.il") load("C:/SS2/r7b/lib/skill/visclasses.il") load("C:/SS2/r7b/lib/skill/cds_crecad.il") load("C:/SS2/r7b/lib/skill/cds_mig_cleanup.il") load("C:/SS2/r7b/lib/skill/add_rko.il") load("C:/SS2/r7b/lib/skill/selcomp.il") load("C:/SS2/r7b/lib/skill/add_via_fill.il") load("C:/SS2/r7b/lib/skill/addHeight.il") load("C:/SS2/r7b/lib/skill/a2btemp.il") load("C:/SS2/r7b/lib/skill/chg_via_byarea.il") load("C:/SS2/r7b/lib/skill/ipc_356.il") Regards, Jan Blückert -----Original Message----- From: Sumathi Kuppuswamy [mailto:sumathi_ramana@xxxxxxxxxxx] Sent: den 30 september 2004 13:40 To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] [PCB_FORUM]skill programming Hi all, I have never used the skill programming. But I have seen mails in this PCB forum talking about skill routines for different functions, that save time, resources etc., So I started to learn about skill programming. I went through the help files of Allegro, I understood that, there should be a "ilinit" file in the env path. I copied an example "ilinit" file in the path and opened the PCB editor 15.2. I get the error message in the command window that, there is error in allegro.ini file. I got struck here. I request somebody to guide me, either through this forum or through individual mail. thanks in advance Sumathi <http://in.rd.yahoo.com/specials/mailtg/*http://yahoo.shaadi.com/india-matrimony/> Yahoo! India Matrimony: Find your life partner online <http://in.rd.yahoo.com/specials/mailtg2/*http://yahoo.shaadi.com/india-matrimony/> .